??? For anyone who has stripped thier engine bay.

byrnech · 04-22-2002, 05:11 PM

In light of taking out my old motor I decided to scrub everything down and re-paint it all. I took out two sensors on the passenger side by the firewall. The have electrical plugs, and vacume plugs. Is having the electrical connectors unhooked going to cause driveability issues? I have the name of the soleniods if this will help. They are emisssions related and are the -Dual AIR Control Solenoids, and the -Secondary Air Injection (AIR) Solenoid Assembly. Thanks for any input.

-Chris

avbcon12 · 04-22-2002, 05:20 PM

that stuff is for the smog pump. if you dont plan on running a smog pump they do you no good. they will throw codes but will not affect drivability.
i dont have them
take care,
adam

byrnech · 04-22-2002, 05:24 PM

Thanks for the info, they are headed straight for the trash.

04-22-2002, 05:11 PM	#1
byrnech Registered Member Join Date: Jun 2001 Location: Anderson, TX. Posts: 166	??? For anyone who has stripped thier engine bay. In light of taking out my old motor I decided to scrub everything down and re-paint it all. I took out two sensors on the passenger side by the firewall. The have electrical plugs, and vacume plugs. Is having the electrical connectors unhooked going to cause driveability issues? I have the name of the soleniods if this will help. They are emisssions related and are the -Dual AIR Control Solenoids, and the -Secondary Air Injection (AIR) Solenoid Assembly. Thanks for any input. -Chris __________________ 331 10:1, AFR 185's, TFS-R intake

04-22-2002, 05:20 PM	#2
avbcon12 Registered Member Join Date: Jul 2001 Location: West Bloomfield, MI Posts: 391	that stuff is for the smog pump. if you dont plan on running a smog pump they do you no good. they will throw codes but will not affect drivability. i dont have them take care, adam __________________ 90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com

04-22-2002, 05:24 PM	#3
byrnech Registered Member Join Date: Jun 2001 Location: Anderson, TX. Posts: 166	Thanks for the info, they are headed straight for the trash. __________________ 331 10:1, AFR 185's, TFS-R intake

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rare Mustangs....Got One?	1969Mach1	Blue Oval Lounge	22	09-25-2010 04:59 AM
Very bad experience with Engine Dynamics of San Jose CA	JAGraff	Classic Mustangs	8	06-16-2005 11:43 AM
Very bad experience with Engine Dynamics of San Jose CA	JAGraff	Racer's Club House	0	05-12-1999 02:27 AM