![]() |
Post Your Trucks Here
Everyone with trucks. Please feel free to Post pics, stories about, mods, problems you've had with it, Etc. Etc.. Since im lazy and I want all you other guys to do the work You can look at my truck in my sig... THATS AN ORDER....
Thanks Bradley |
ooopps. Did you mean here in this thread or here in this forum? Oh well. Sorry.
:) |
1994 GEN 1
http://f150online.com/galleries/images/80-904-27893.jpg
http://f150online.com/galleries/images/80-77-13664.jpg http://f150online.com/galleries/images/80-76-408.jpg http://f150online.com/galleries/images/80-76-34388.jpg 1994 Ultra Red #2019 of 4007 built on April 14, 1994. Off-road H-pipe with Magnaflow 2.5" dual in/dual out X-crossover and turndowns, timing @ 12.5*, March 1015 pullies, K&N cone filter with "ram air", factory traction bar snubber trick, FMS 9mm wires, MSD 6A and MSD TFI Blaster coil, Sportmaster Tonneau cover, Ford bedliner, Class 4 receiver hitch, Sony MX-620 (can't remember exact model number) head unit, Orion 12" sub, Sony and Pioneer cab speakers, amps on all the speakers, Autometer Phantom 2 5/8" oil pressure and water temp gauges on A-pillar. ET as stock was 15.3 @ 90 w/2.3 60ft. No times with mods. Don't get to the track much anymore. |
48 Ford F1, It was my dads first car that is now in the process of being restored, hopefully i will have some pics on the computer soon and i will post them
Mods: Soon to be powered by 392 Hemi With Race Cam and Tunnel Ram intake, Race Prepped 727 Touqeflight tranny. Im going to run the hemi setup while i race highschool then im going to put the original Flathead V-8 in it. Steven |
I just bought a 2000 F150 5.4 Triton, silver, longbed. Bone stock for now. Pics soon.
|
I just bought a 02 Ranger XLT right off the showroom floor. I LOVE IT !!! Many mods planned. Pics comming soon.
|
http://www.5-0.org/images/stangs/eriklightning.jpg http://community.webshots.com/sym/im...0VcMOZQ_ph.jpg http://community.webshots.com/sym/im...9GwLFvX_ph.jpg http://community.webshots.com/sym/im...2MgDUrb_ph.jpg
http://community.webshots.com/album/36965548zRfjyB Thats my '94 Gen 1. Build number 2443 of 4007 built on april 27th, 1994. Its just about all stock except for a K&N filter and a JET chip. I will be adding a catless hpipe and a flowmaster, and also underdrive pullies this week and a better oil cooler. Hoping to get it to the track soon. |
BTW, I took the steps and the toneau cover off for the time being.
|
My 97 F150 tow vehicle.
Lowered/mags/fatties, turbo muffler, dual tip exhaust, 4x4 front end w/factory fog lights, tonneau cover, rear spoiler, rear roll pan, custom tail lights, Lightning headlights, clear corners, tinted windows, different emblems, hood scoop, billet fuel cover, I"m sure I"m forgetting some of the stuff. It's just my tow vehicle, so I don't plan on modding the engine. ;)http://www.fordmustang.co.uk/fm-pix/...s/MVC-002S.JPG |
My 67 U100
1 Attachment(s)
This is my 67 Bronco... well mostly 67. It has a blueprinted 302 (69) 2bbl, headers, about 250 hp, 3 speed on the column, J-shift Dana 20 Transfer case, Ford 9" rear axle (heavy duty 3,300 lb.), Dana 44 front axle with power steering, power disk brakes and the rare torsion bar.
|
1 Attachment(s)
here's the fairly new addition to my driveway. I got a little crazy on campus after they played mud volleyball:)
|
Sweet Drew, Broncos are nice... Get yourself a trailer and you have something to tow your stang aroudn to different events and stuff. That way the hoping you dont break something at the track isnt such a big deal anymore. The bronco should pull the car and a good trailer pretty good since the hitching point is so close to the rear end. ( much closer on a bronco than on a F-150, be more like pulling a gooseneck trailer with a regular truck )
Congrats dude Bradley |
Yeah I love it. I borrowed a trailer a couple weekends ago to go racing, and it pulled it no sweat, even though it was a pretty heavy trailer.
It got 12mpg with the AC on cruising at 70mph, not too bad I'd say. |
Last time I pulled the car to BG bout two hours I got 11mpg there and back so I'd say your sittin about right on the MPG..
Congrats again Bradley |
Lets see if this works
This is my motor, with the bronco in the background http://media.mustangworks.com/data/5...68MVC-245F.JPG |
I've always wanted a late 80's-mid 90's Bronco, especially one with a 351, that would be a fun vehicle to drive. I love the short wheel base and steering radius, fun in the mud :D I've had a few friends with Broncos, one has a '68 i believe.
|
|
I'll try this again, www.ftw.truckmoxie.com/gallery/KTPMAN
I love my stang but my truck is still my baby |
|
Yep thats her, thanks. Hopefully she'll get flames in the spring to match the grill.
|
1 Attachment(s)
not much, but this is my truck
|
Hey as long as you like it thats all that matters.
And welcome to Mustangworks |
1 Attachment(s)
My 2002 f150 Fx4 has a 3 inch body and 3 inch suspension lift with 35 inch tires mostly stock left.
|
Quote:
|
I like the flame idea. I had my truck sitting at the body shop for flames when I got activated and sent to Iraq now that I am back I plan on doing it still. The only thing is it is going to take me a little while as the pay cut I took to go to Iraq hurt me and my savings was used up. But a few months I hope to be back to normal and get it done.
|
I don't have a pic to put up, but i have a 48 Ford F1
mods: 74 390FE engine W/ C-6 Tranny Edelbrock Performer RPM Heads and Intake Crane Cam (Not Sure Specs) 73 9" rearend w/ Powertrax Locker and 4.10 Gears So far it looks like crap but runs like hell, last time at the track i went 14.0 @ 101 taking off easy in Second gear. Ill try and get a pic on and put a link to it Steven |
|
Re: Post Your Trucks Here
84 ford bronco 2. wild horse rock crawler coils, radius arm front suspension, full width 1/2 ton high pinion disc brake dana 44 and 8.8, 5.13 gears, detroit locker, 36" michelin military tires on it right now(in the picture they are some borrowed worn out 35's)
http://www.supermotors.org/getfile/1...e/IMGP3508.JPG http://www.supermotors.org/getfile/1...e/IMGP3510.jpg http://www.supermotors.org/getfile/1...e/IMGP3439.jpg |
Re: Post Your Trucks Here
Sweet trucks all of you guys. Lets keep this thing going. Just becuase we have some kick ass cars doenst mean we should let our trucks go by the wayside. Lets get to modding them more ...
|
Re: Post Your Trucks Here
3 Attachment(s)
Here's my new toy. 2001 Lightning. Stock except for traction bars and flowmaster catback. 21k miles and mint. :)
|
Re: Post Your Trucks Here
how do u add pictures to your thread?
|
Re: Post Your Trucks Here
1990 F-150 w/1993 5.0 HO, AOD Trans.
Holley 570 Street Avenger Carb. Holley Street Dominator Intake Belt Fan Removed (Electric Fans of course) B&M Shift Improver Kit B&M Floor Shifter 180-degree thermostat Everything else is bone stock as far as i know (including the 3.06 rear gear, soon to be replaced with a 4.10 ;) ) Its not much but its mine :) |
Re: Post Your Trucks Here
Here's my 1999 (or psuedo 2000) SVT Lightning, dubbed "Project: Lightning Hauler". :)
http://media.mustangworks.com/data/3...uler_-_001.jpg Lots more photos here too: http://media.mustangworks.com/showgallery.php/cat/3055 |
Re: Post Your Trucks Here
2 Attachment(s)
The silver one is my current truck. It's an 04 heritage STX 4.2L 5spd. It currently has 2" lowering shackles on the rear and a flowtech afterburner muffler with a dump. This pic is from the day after I bought it, so it was still bone stock in the pic (and brand new). The other pic is my old 93 F150 that I wish I still had. It was lowered 3/5 with some nice 17" wheels (anything bigger is too much). It had a completely custom interior with bucket seats and a flip down center console that had was also a seat. Under the center seat was an ice chest with a drain hole in it. Made for some good beach trips. It had a really nice system in it too. I traded it for the 01 GT I had before my current truck.
|
Re: Post Your Trucks Here
2 Attachment(s)
I think it is partially in my sig, but it is a 79 f-250 with extra leaf springs in the front and rear. 4.10 Factory Limited slip, 4 speed, Ford 351m, and a cd player (lol).
Was my first vehicle, couldn’t let her go so I repainted her instead. If the 351m finally ever gives up, I have a 460 sitting on the stand waiting to go in. :) The truck doesn’t see much driving time right now, but if I ever buy a house, I will probably drive it more often as my daily driver. |
Re: Post Your Trucks Here
I have a 1995 gen 1 lighting
afr 185's 1.7 rr's zex 75 dry shot one fun ride? i think so. workin on pics of the L |
Re: Post Your Trucks Here
nice motor whats in it?
|
Re: Post Your Trucks Here
question was for mustangman65_79
|
Re: Post Your Trucks Here
New to me truck...
94, F-150.. It was an older mans truck. NO power window or locks, no cruise, no carpet. No frills just a truck. Love it so far. Gonna do some dress up work on it but I plan on keeping this one for a long long time. http://i99.photobucket.com/albums/l2...k/IMG_1969.jpg http://i99.photobucket.com/albums/l2...k/IMG_1971.jpg http://i99.photobucket.com/albums/l2...k/IMG_1970.jpg |
Re: Post Your Trucks Here
Yeah, still cool.
Time for a fuel injected 460 project! :) |
Re: Post Your Trucks Here
Quote:
|
Re: Post Your Trucks Here
I accept with information:48 Ford F1, It was my dads first car that is now in the process of being restored, hopefully i will have some pics on the computer soon and i will post them
Mods: Soon to be powered by 392 Hemi With Race Cam and Tunnel Ram intake, Race Prepped 727 Touqeflight tranny. |
All times are GMT -5. The time now is 04:03 AM. |