Post Your Trucks Here

Coupe Devil · 12-30-2002, 09:24 PM

Everyone with trucks. Please feel free to Post pics, stories about, mods, problems you've had with it, Etc. Etc.. Since im lazy and I want all you other guys to do the work You can look at my truck in my sig... THATS AN ORDER....

Thanks
Bradley

PKRWUD · 12-31-2002, 06:14 AM

ooopps. Did you mean here in this thread or here in this forum? Oh well. Sorry.

95GTS · 12-31-2002, 06:34 PM

1994 Ultra Red #2019 of 4007 built on April 14, 1994. Off-road H-pipe with Magnaflow 2.5" dual in/dual out X-crossover and turndowns, timing @ 12.5*, March 1015 pullies, K&N cone filter with "ram air", factory traction bar snubber trick, FMS 9mm wires, MSD 6A and MSD TFI Blaster coil, Sportmaster Tonneau cover, Ford bedliner, Class 4 receiver hitch, Sony MX-620 (can't remember exact model number) head unit, Orion 12" sub, Sony and Pioneer cab speakers, amps on all the speakers, Autometer Phantom 2 5/8" oil pressure and water temp gauges on A-pillar. ET as stock was 15.3 @ 90 w/2.3 60ft. No times with mods. Don't get to the track much anymore.

01-15-2003, 07:37 PM

48 Ford F1, It was my dads first car that is now in the process of being restored, hopefully i will have some pics on the computer soon and i will post them

Mods: Soon to be powered by 392 Hemi With Race Cam and Tunnel Ram intake, Race Prepped 727 Touqeflight tranny.

Im going to run the hemi setup while i race highschool then im going to put the original Flathead V-8 in it.

Steven

BLACK85GT · 02-16-2003, 11:11 PM

I just bought a 2000 F150 5.4 Triton, silver, longbed. Bone stock for now. Pics soon.

Mass Stang · 04-21-2003, 12:26 PM

I just bought a 02 Ranger XLT right off the showroom floor. I LOVE IT !!! Many mods planned. Pics comming soon.

erikd93lx · 05-11-2003, 02:01 PM

http://community.webshots.com/album/36965548zRfjyB

Thats my '94 Gen 1. Build number 2443 of 4007 built on april 27th, 1994. Its just about all stock except for a K&N filter and a JET chip. I will be adding a catless hpipe and a flowmaster, and also underdrive pullies this week and a better oil cooler. Hoping to get it to the track soon.

erikd93lx · 05-11-2003, 02:05 PM

BTW, I took the steps and the toneau cover off for the time being.

drag79stang · 06-26-2003, 05:07 PM

My 97 F150 tow vehicle.
Lowered/mags/fatties, turbo muffler, dual tip exhaust, 4x4 front end w/factory fog lights, tonneau cover, rear spoiler, rear roll pan, custom tail lights, Lightning headlights, clear corners, tinted windows, different emblems, hood scoop, billet fuel cover, I"m sure I"m forgetting some of the stuff.

It's just my tow vehicle, so I don't plan on modding the engine.

http://www.fordmustang.co.uk/fm-pix/...s/MVC-002S.JPG

turbotim2 · 07-18-2003, 11:55 AM

This is my 67 Bronco... well mostly 67. It has a blueprinted 302 (69) 2bbl, headers, about 250 hp, 3 speed on the column, J-shift Dana 20 Transfer case, Ford 9" rear axle (heavy duty 3,300 lb.), Dana 44 front axle with power steering, power disk brakes and the rare torsion bar.

fiveohpatrol · 09-11-2003, 06:47 PM

here's the fairly new addition to my driveway. I got a little crazy on campus after they played mud volleyball

Coupe Devil · 09-14-2003, 09:41 AM

Sweet Drew, Broncos are nice... Get yourself a trailer and you have something to tow your stang aroudn to different events and stuff. That way the hoping you dont break something at the track isnt such a big deal anymore. The bronco should pull the car and a good trailer pretty good since the hitching point is so close to the rear end. ( much closer on a bronco than on a F-150, be more like pulling a gooseneck trailer with a regular truck )

Congrats dude
Bradley

fiveohpatrol · 09-14-2003, 05:57 PM

Yeah I love it. I borrowed a trailer a couple weekends ago to go racing, and it pulled it no sweat, even though it was a pretty heavy trailer.
It got 12mpg with the AC on cruising at 70mph, not too bad I'd say.

Coupe Devil · 09-14-2003, 09:46 PM

Last time I pulled the car to BG bout two hours I got 11mpg there and back so I'd say your sittin about right on the MPG..

Congrats again

Bradley

mustangman65_79 · 09-22-2003, 07:38 AM

Lets see if this works

This is my motor, with the bronco in the background

goodyear1984 · 03-12-2007, 12:51 AM

nice motor whats in it?

goodyear1984 · 03-12-2007, 12:52 AM

question was for mustangman65_79

Coupe Devil · 07-30-2009, 08:13 AM

New to me truck...

94, F-150.. It was an older mans truck. NO power window or locks, no cruise, no carpet. No frills just a truck.

Love it so far. Gonna do some dress up work on it but I plan on keeping this one for a long long time.

StangFlyer · 07-30-2009, 10:10 AM

Yeah, still cool.

Time for a fuel injected 460 project!

84LX89GT · 11-12-2003, 02:55 PM

I've always wanted a late 80's-mid 90's Bronco, especially one with a 351, that would be a fun vehicle to drive. I love the short wheel base and steering radius, fun in the mud

I've had a few friends with Broncos, one has a '68 i believe.

12-30-2002, 09:24 PM	#1
Coupe Devil Moderator Join Date: Mar 2001 Location: Myrtle Beach SC Posts: 1,643	Post Your Trucks Here Everyone with trucks. Please feel free to Post pics, stories about, mods, problems you've had with it, Etc. Etc.. Since im lazy and I want all you other guys to do the work You can look at my truck in my sig... THATS AN ORDER.... Thanks Bradley __________________ 1990 GT, 347, TFS TW Heads, TFS Cam, TFS Track heat, Twin turbos, FMIC, T5. Built Ford Tough Moderator

12-31-2002, 06:34 PM	#3
95GTS Git jiggy Join Date: Oct 1999 Location: MO USA Posts: 865	1994 GEN 1 1994 Ultra Red #2019 of 4007 built on April 14, 1994. Off-road H-pipe with Magnaflow 2.5" dual in/dual out X-crossover and turndowns, timing @ 12.5*, March 1015 pullies, K&N cone filter with "ram air", factory traction bar snubber trick, FMS 9mm wires, MSD 6A and MSD TFI Blaster coil, Sportmaster Tonneau cover, Ford bedliner, Class 4 receiver hitch, Sony MX-620 (can't remember exact model number) head unit, Orion 12" sub, Sony and Pioneer cab speakers, amps on all the speakers, Autometer Phantom 2 5/8" oil pressure and water temp gauges on A-pillar. ET as stock was 15.3 @ 90 w/2.3 60ft. No times with mods. Don't get to the track much anymore. __________________ 1967 Mustang Coupe

02-16-2003, 11:11 PM	#5
BLACK85GT Registered Member Join Date: May 2002 Location: Tampa,FLORIDA Posts: 340	I just bought a 2000 F150 5.4 Triton, silver, longbed. Bone stock for now. Pics soon. __________________ 5.0, Holley heads, 1.7 Scorp Rockers, Stealth intake, Holley 600 carb, Holley Mech. Fuel pump, MSD 6Digital, MSD distributor, Hotchkis upper/lower rear control arms, FMS B Springs, 3:73 (8.8) rear. Production # 9,377

04-21-2003, 12:26 PM	#6
Mass Stang Registered Member Join Date: Apr 2003 Location: Boston, Mass. Posts: 110	I just bought a 02 Ranger XLT right off the showroom floor. I LOVE IT !!! Many mods planned. Pics comming soon. __________________

05-11-2003, 02:01 PM	#7
erikd93lx Registered Member Join Date: Dec 2002 Location: Terrytown, La. Posts: 18	http://community.webshots.com/album/36965548zRfjyB Thats my '94 Gen 1. Build number 2443 of 4007 built on april 27th, 1994. Its just about all stock except for a K&N filter and a JET chip. I will be adding a catless hpipe and a flowmaster, and also underdrive pullies this week and a better oil cooler. Hoping to get it to the track soon. __________________ '93 lx---built 331 and a bunch of stuff(gone but not forgotten) '94 white lightning, #2443 of 4007, built on april 27th, 1994. JET chip and a K&N my ride: http://community.webshots.com/album/36965548zRfjyB

12-31-2002, 06:14 AM	#2
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	ooopps. Did you mean here in this thread or here in this forum? Oh well. Sorry. __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

01-15-2003, 07:37 PM	#4
Young_Pony Guest Posts: n/a	48 Ford F1, It was my dads first car that is now in the process of being restored, hopefully i will have some pics on the computer soon and i will post them Mods: Soon to be powered by 392 Hemi With Race Cam and Tunnel Ram intake, Race Prepped 727 Touqeflight tranny. Im going to run the hemi setup while i race highschool then im going to put the original Flathead V-8 in it. Steven

05-11-2003, 02:05 PM	#8
erikd93lx Registered Member Join Date: Dec 2002 Location: Terrytown, La. Posts: 18	BTW, I took the steps and the toneau cover off for the time being. __________________ '93 lx---built 331 and a bunch of stuff(gone but not forgotten) '94 white lightning, #2443 of 4007, built on april 27th, 1994. JET chip and a K&N my ride: http://community.webshots.com/album/36965548zRfjyB

06-26-2003, 05:07 PM	#9
drag79stang Dont make me take my belt off Join Date: Sep 2000 Posts: 58	My 97 F150 tow vehicle. Lowered/mags/fatties, turbo muffler, dual tip exhaust, 4x4 front end w/factory fog lights, tonneau cover, rear spoiler, rear roll pan, custom tail lights, Lightning headlights, clear corners, tinted windows, different emblems, hood scoop, billet fuel cover, I"m sure I"m forgetting some of the stuff. It's just my tow vehicle, so I don't plan on modding the engine. http://www.fordmustang.co.uk/fm-pix/...s/MVC-002S.JPG Last edited by drag79stang; 01-21-2006 at 03:24 PM..

09-14-2003, 09:41 AM	#12
Coupe Devil Moderator Join Date: Mar 2001 Location: Myrtle Beach SC Posts: 1,643	Sweet Drew, Broncos are nice... Get yourself a trailer and you have something to tow your stang aroudn to different events and stuff. That way the hoping you dont break something at the track isnt such a big deal anymore. The bronco should pull the car and a good trailer pretty good since the hitching point is so close to the rear end. ( much closer on a bronco than on a F-150, be more like pulling a gooseneck trailer with a regular truck ) Congrats dude Bradley __________________ 1990 GT, 347, TFS TW Heads, TFS Cam, TFS Track heat, Twin turbos, FMIC, T5. Built Ford Tough Moderator

09-14-2003, 05:57 PM	#13
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	Yeah I love it. I borrowed a trailer a couple weekends ago to go racing, and it pulled it no sweat, even though it was a pretty heavy trailer. It got 12mpg with the AC on cruising at 70mph, not too bad I'd say. __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

09-14-2003, 09:46 PM	#14
Coupe Devil Moderator Join Date: Mar 2001 Location: Myrtle Beach SC Posts: 1,643	Last time I pulled the car to BG bout two hours I got 11mpg there and back so I'd say your sittin about right on the MPG.. Congrats again Bradley __________________ 1990 GT, 347, TFS TW Heads, TFS Cam, TFS Track heat, Twin turbos, FMIC, T5. Built Ford Tough Moderator

09-22-2003, 07:38 AM	#15
mustangman65_79 My poor 79 RIP Join Date: Oct 2001 Location: Suisun City, Posts: 2,320	Lets see if this works This is my motor, with the bronco in the background __________________ '84 mustang GT turbo '85 LTD '89 Camaro Irocz z28 '94 Lightning '96 Trans am

03-12-2007, 12:51 AM	#16
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: Post Your Trucks Here nice motor whats in it? __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

03-12-2007, 12:52 AM	#17
goodyear1984 Registered Member Join Date: Dec 2006 Location: new york Posts: 482	Re: Post Your Trucks Here question was for mustangman65_79 __________________ 347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo

07-30-2009, 08:13 AM	#18
Coupe Devil Moderator Join Date: Mar 2001 Location: Myrtle Beach SC Posts: 1,643	Re: Post Your Trucks Here New to me truck... 94, F-150.. It was an older mans truck. NO power window or locks, no cruise, no carpet. No frills just a truck. Love it so far. Gonna do some dress up work on it but I plan on keeping this one for a long long time. __________________ 1990 GT, 347, TFS TW Heads, TFS Cam, TFS Track heat, Twin turbos, FMIC, T5. Built Ford Tough Moderator

07-30-2009, 10:10 AM	#19
StangFlyer Founder Join Date: Jun 1995 Location: Michigan Posts: 19,326	Re: Post Your Trucks Here Yeah, still cool. Time for a fuel injected 460 project! __________________ StangFlyer 1991 Mustang GT - Supercharged 377 Stroker 2000 Ford Lightning - Project Lightning Hauler Media Center Gallery - View my member photos

11-12-2003, 02:55 PM	#20
84LX89GT Mustangs Join Date: Jul 2000 Posts: 1,938	I've always wanted a late 80's-mid 90's Bronco, especially one with a 351, that would be a fun vehicle to drive. I love the short wheel base and steering radius, fun in the mud I've had a few friends with Broncos, one has a '68 i believe. __________________ 2005 Suzuki Hayabusa GSX1300-R 1980 Ford Thunderbird - 255 V8 ported heads, 5.0L ported stock headers, O.R. H-pipe and Flowmaster 2-chambers, dual roller timing chain hi-po Mack Truck hood emblem 1985 Mustang GT 5.0L T5, F-303, GT40p, headers, off-road h, flowmasters, MSD stuff, etc. Sold 02/06/04 1989 Mustang GT ET: 13.304@102.29 mph (5-24-03) Sold - 1998 Mustang Cobra coupe, 1/4 mile - street tires: 13.843@103.41 (bone stock)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
bring back post count	7up	Blue Oval Lounge	46	09-17-2002 01:58 PM
post count poll	82 GT	Blue Oval Lounge	25	09-02-2002 12:21 PM
just found this board....gonna post here no one answers on othr board	StangGT02	Stang Stories	5	07-23-2002 01:51 AM
Post Counting?	lx mike	Blue Oval Lounge	16	01-21-2002 09:09 PM