I need help fixin my car

TexasTracie · 02-16-2005, 12:10 PM

Hey ya'll! I dont know much about cars or there parts but i need help fixin my car. I need to rotate my rotors and put new brakes on. i need to know how to do this i will have help but i need all the help i can get so please get back to me asap. Texas Tracie

Fat0eknee · 02-16-2005, 12:17 PM

-take caliper off
-there is a dust cap on the end of the rotor take that off
-remove cotter key
-take off the nut and the washer
the the rotor should slide right off the spindle afterwards then just take it to autozone or pepboys or whatever and they should turn them for you

before you reinstall take a look at the bearings ...some people repack them if they look ok or you can just buy new ones, you will also need a new seal

TexasTracie · 02-16-2005, 12:24 PM

Thank you so much! I am just starting to fix my car up.... do you know any good sites where i can get white/clear taillights?

Fat0eknee · 02-16-2005, 12:49 PM

...you really want altezzas?
just google it in and a bunch of sites should come up
http://www.dallasmustang.com/index.m...up=9&family=56

latshaw · 02-20-2005, 10:52 PM

is a crank from a 302 ho. the same as a regular 302 . i have a regular crank in a 302 ca i put a b303 cam in it . thanks help.

02-16-2005, 12:10 PM	#1
TexasTracie Registered Member Join Date: Feb 2005 Posts: 2	I need help fixin my car Hey ya'll! I dont know much about cars or there parts but i need help fixin my car. I need to rotate my rotors and put new brakes on. i need to know how to do this i will have help but i need all the help i can get so please get back to me asap. Texas Tracie

02-16-2005, 12:17 PM	#2
Fat0eknee I'm slow ...I know. Join Date: Dec 2003 Location: houston Posts: 518	Re: I need help fixin my car -take caliper off -there is a dust cap on the end of the rotor take that off -remove cotter key -take off the nut and the washer the the rotor should slide right off the spindle afterwards then just take it to autozone or pepboys or whatever and they should turn them for you before you reinstall take a look at the bearings ...some people repack them if they look ok or you can just buy new ones, you will also need a new seal

02-16-2005, 12:24 PM	#3
TexasTracie Registered Member Join Date: Feb 2005 Posts: 2	Re: I need help fixin my car Thank you so much! I am just starting to fix my car up.... do you know any good sites where i can get white/clear taillights?

02-16-2005, 12:49 PM	#4
Fat0eknee I'm slow ...I know. Join Date: Dec 2003 Location: houston Posts: 518	Re: I need help fixin my car ...you really want altezzas? just google it in and a bunch of sites should come up http://www.dallasmustang.com/index.m...up=9&family=56 Last edited by Fat0eknee; 02-16-2005 at 01:08 PM..

02-20-2005, 10:52 PM	#5
latshaw Registered Member Join Date: Feb 2005 Location: dover Posts: 1	Re: I need help fixin my car is a crank from a 302 ho. the same as a regular 302 . i have a regular crank in a 302 ca i put a b303 cam in it . thanks help.