66 for pickup????????

vande97 · 04-28-2001, 05:36 PM

my buddie has a 66 ford pickup. it has been sitting for about 6 years and it is not in good shape! but we are in the process of gwtting it back together. I am wondering what type of rearend came in this truck? i think it is an 9 inch but i could be wrong!.
Also we finally got the rear drums off after beating them to nothing. I turned one of the axel's and the the other one turned but the pig in the rear did not spin is this right? I have the drive shaft out and i can not turn the pig by hand is this right? what could be the cause for this? also one more question. Where can i find a whole rear end for this truck at a decent price, i want the whole thing to be assembled all the way to the brakes any advice would help alot,

thanks in advance!

05-08-2001, 04:05 PM

If it's a completely round housing then it's probably a 9" rear, i believe the trucks came with them back then, but i could be wrong. The most likely place to find parts for this truck is in local papers, and auto/parts trader magazines if you want a decent price for the stuff, auto salvage yards with older vehicles are also likely to have stuff for it. If it is a 9" rearend, i believe you can just swap out the 3rd member and many places offer bolt in 3rd members since yours sounds like it's seized/rusted and there are many rebuild kits you can buy for the axle assembly. Good luck and have fun!

Maroon 5.0 LX · 05-09-2001, 11:54 AM

Take a stroll over to: http://www.ford-trucks.com/cgi-bin/dcforum/dcboard.cgi

There are a bunch of Ford truck guys there that will probably be able to give you some good info. There's a section that includes the '66's.

------------------
'89 LX 5.0 - 5 speed. Original Owner
'94 E-150 Conversion Van

[This message has been edited by Maroon 5.0 LX (edited 05-09-2001).]

[This message has been edited by Maroon 5.0 LX (edited 05-09-2001).]

04-28-2001, 05:36 PM	#1
vande97 Registered Member Join Date: Jan 2001 Location: okemos Posts: 205	66 for pickup???????? my buddie has a 66 ford pickup. it has been sitting for about 6 years and it is not in good shape! but we are in the process of gwtting it back together. I am wondering what type of rearend came in this truck? i think it is an 9 inch but i could be wrong!. Also we finally got the rear drums off after beating them to nothing. I turned one of the axel's and the the other one turned but the pig in the rear did not spin is this right? I have the drive shaft out and i can not turn the pig by hand is this right? what could be the cause for this? also one more question. Where can i find a whole rear end for this truck at a decent price, i want the whole thing to be assembled all the way to the brakes any advice would help alot, thanks in advance!

05-08-2001, 04:05 PM	#2
84stangLX Guest Posts: n/a	If it's a completely round housing then it's probably a 9" rear, i believe the trucks came with them back then, but i could be wrong. The most likely place to find parts for this truck is in local papers, and auto/parts trader magazines if you want a decent price for the stuff, auto salvage yards with older vehicles are also likely to have stuff for it. If it is a 9" rearend, i believe you can just swap out the 3rd member and many places offer bolt in 3rd members since yours sounds like it's seized/rusted and there are many rebuild kits you can buy for the axle assembly. Good luck and have fun!

05-09-2001, 11:54 AM	#3
Maroon 5.0 LX Registered Member Join Date: Mar 2001 Location: Southern Maryland Posts: 471	Take a stroll over to: http://www.ford-trucks.com/cgi-bin/dcforum/dcboard.cgi There are a bunch of Ford truck guys there that will probably be able to give you some good info. There's a section that includes the '66's. ------------------ '89 LX 5.0 - 5 speed. Original Owner '94 E-150 Conversion Van [This message has been edited by Maroon 5.0 LX (edited 05-09-2001).] [This message has been edited by Maroon 5.0 LX (edited 05-09-2001).]