MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Built Ford Tough
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 12-13-2005, 02:39 PM   #1
lvcc79
Registered Member
 
Join Date: Sep 2005
Posts: 4
Question 4 cyl t-5

I have a 4 cyl t-5 and I heard that I could use it with a v8. What would I need to change or modify to use this in a v8 car?
lvcc79 is offline   Reply With Quote
Old 12-14-2005, 12:42 AM   #2
Unit 5302
Registered Member
 
Join Date: May 1999
Posts: 5,246
Default Re: 4 cyl t-5

There are differing opinions on how well the 4 banger T-5 will hold up. It's definitely not nearly as strong as the V8 T-5s, and those T-5s don't have the best reliability record as it is.

The 4cylinder cars had non-world class T-5s with weaker input shaft bearings and other internals. They also had different gear ratios, and the input shafts were different lengths.

Personally, I'd find a little extra cash and put a world class unit in there rather than gambling with the glass jawed 4banger unit.
Unit 5302 is offline   Reply With Quote
Old 12-14-2005, 10:53 PM   #3
johnwb
88lx work in progress
 
johnwb's Avatar
 
Join Date: Jul 2005
Location: canada
Posts: 62
Default Re: 4 cyl t-5

I m using a 5 speed out of a 4 banger in mine this summer ,it will proabbly brake but i know people that have used them and got away with it. you have to change the pilot bearing.They are geared a little lower too so it will mess your speedo.
johnwb is offline   Reply With Quote
Old 12-21-2005, 02:15 AM   #4
Unit 5302
Registered Member
 
Join Date: May 1999
Posts: 5,246
Default Re: 4 cyl t-5

Shouldn't change your speedo. The speedometer gear is driven off the output shaft of the transmission so the speedometer doesn't care what gear you're in, just the output shaft revolutions. If it's wrong, you're just using the wrong speedo gear.
Unit 5302 is offline   Reply With Quote
Old 12-21-2005, 10:42 AM   #5
lvcc79
Registered Member
 
Join Date: Sep 2005
Posts: 4
Default Re: 4 cyl t-5

anybody know what pilot bearing willwork?
lvcc79 is offline   Reply With Quote
Old 12-22-2005, 11:04 AM   #6
bigwhitecobra
Huh? Whatcha said?
 
bigwhitecobra's Avatar
 
Join Date: Oct 2000
Location: Fayetteville, NC
Posts: 1,073
Default Re: 4 cyl t-5

Instead of changing the pilot bearing, change the weakest link....the input shaft. It's not that complicated and you will thank yourself later. How much power are you planning on running through that thing? (Cause if it's "some"!!!.....Homer Simpson).
__________________
2003 GT White---STOLEN
May you burn in hell whoever took it. Dumbazz didn't even get the good engine that was in the garage.
bigwhitecobra is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:18 PM.


SEARCH