MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Built Ford Tough
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 01-01-2003, 08:27 AM   #1
gofastmercury
Registered Member
 
gofastmercury's Avatar
 
Join Date: May 2001
Location: calgary alberta canada
Posts: 366
Default Gofastmercury' truck

Here 's a few of my 67 ranchero, It has a box, so its a truck! It's a 390 car, I mean truck, that I put a 460 into this year. So far, so good. Just had some minor holley problems to begine with, but it runs fine now . Way better that the 390. I accually like driving it now. But were having a baby(due Jan4) So I got to sell it. Just bought its replacement, a 59 ford 4 door.
Attached Images
File Type: jpg ranchero2.jpg (216.1 KB, 18 views)
__________________
93LXcopcarSOLD14.3@96 @ 4500ft 2.02 60ft on street tires.
my 67 ranchero NOT A 390 ANY MORE! 460! 3.70's cast manifolds, comp cams 262H, performer, 750DP 100K out of 79 F250
NEW(oct20/02)14.58@95mph 2.3 60 ft
corrects to:13.86@100
66 merc comet351w, isky roller 600 lift 268/260@.050, vic jr. 700DP, 5000stall, 4.56's c-4, 3400lbs with driver
12.3@110 @ 4000ft 1.69 60 ft
corrects to:11.69@115
gofastmercury is offline   Reply With Quote
Old 01-01-2003, 08:28 AM   #2
gofastmercury
Registered Member
 
gofastmercury's Avatar
 
Join Date: May 2001
Location: calgary alberta canada
Posts: 366
Default

And another:
Attached Images
File Type: jpg rancheroengine.jpg (186.8 KB, 14 views)
__________________
93LXcopcarSOLD14.3@96 @ 4500ft 2.02 60ft on street tires.
my 67 ranchero NOT A 390 ANY MORE! 460! 3.70's cast manifolds, comp cams 262H, performer, 750DP 100K out of 79 F250
NEW(oct20/02)14.58@95mph 2.3 60 ft
corrects to:13.86@100
66 merc comet351w, isky roller 600 lift 268/260@.050, vic jr. 700DP, 5000stall, 4.56's c-4, 3400lbs with driver
12.3@110 @ 4000ft 1.69 60 ft
corrects to:11.69@115
gofastmercury is offline   Reply With Quote
Old 01-01-2003, 08:36 AM   #3
gofastmercury
Registered Member
 
gofastmercury's Avatar
 
Join Date: May 2001
Location: calgary alberta canada
Posts: 366
Default

Last one:
Attached Images
File Type: jpg ranchero4.jpg (218.7 KB, 14 views)
__________________
93LXcopcarSOLD14.3@96 @ 4500ft 2.02 60ft on street tires.
my 67 ranchero NOT A 390 ANY MORE! 460! 3.70's cast manifolds, comp cams 262H, performer, 750DP 100K out of 79 F250
NEW(oct20/02)14.58@95mph 2.3 60 ft
corrects to:13.86@100
66 merc comet351w, isky roller 600 lift 268/260@.050, vic jr. 700DP, 5000stall, 4.56's c-4, 3400lbs with driver
12.3@110 @ 4000ft 1.69 60 ft
corrects to:11.69@115
gofastmercury is offline   Reply With Quote
Old 01-01-2003, 10:49 AM   #4
PKRWUD
Junior Member
 
PKRWUD's Avatar
 
Join Date: Mar 1999
Location: Ventura, California
Posts: 8,981
Default

Man, that's sweet! Very clean! That engine looks like a lot of fun to change the plugs in! lol. My buddy and I built a 64 Ranchero, and barely squeezed a 302 in it.

Very nice Ranchero!!

Take care,
~Chris
__________________
Webmaster:
Rice Haters Club
Jim Porter Racing
Peckerwoods Pit Stop


Support Your Local
RED & WHITE!
PKRWUD is offline   Reply With Quote
Old 01-01-2003, 03:28 PM   #5
gofastmercury
Registered Member
 
gofastmercury's Avatar
 
Join Date: May 2001
Location: calgary alberta canada
Posts: 366
Default

Quote:
Originally posted by PKRWUD
That engine looks like a lot of fun to change the plugs in! lol.
Believe it or not... It easier with the 460 than the 390.
Thanks for the comments Chris.
__________________
93LXcopcarSOLD14.3@96 @ 4500ft 2.02 60ft on street tires.
my 67 ranchero NOT A 390 ANY MORE! 460! 3.70's cast manifolds, comp cams 262H, performer, 750DP 100K out of 79 F250
NEW(oct20/02)14.58@95mph 2.3 60 ft
corrects to:13.86@100
66 merc comet351w, isky roller 600 lift 268/260@.050, vic jr. 700DP, 5000stall, 4.56's c-4, 3400lbs with driver
12.3@110 @ 4000ft 1.69 60 ft
corrects to:11.69@115
gofastmercury is offline   Reply With Quote
Old 01-19-2003, 11:56 PM   #6
gofastmercury
Registered Member
 
gofastmercury's Avatar
 
Join Date: May 2001
Location: calgary alberta canada
Posts: 366
Default

Well, that baby is here and now I got to sell it. The problem is, I have no idea whats its worth. Not even a guess really. Its not a prefect truck by any means, buit it looks good going down the road. Any thoughts? I still have all factory 390 stuff. Thanks
__________________
93LXcopcarSOLD14.3@96 @ 4500ft 2.02 60ft on street tires.
my 67 ranchero NOT A 390 ANY MORE! 460! 3.70's cast manifolds, comp cams 262H, performer, 750DP 100K out of 79 F250
NEW(oct20/02)14.58@95mph 2.3 60 ft
corrects to:13.86@100
66 merc comet351w, isky roller 600 lift 268/260@.050, vic jr. 700DP, 5000stall, 4.56's c-4, 3400lbs with driver
12.3@110 @ 4000ft 1.69 60 ft
corrects to:11.69@115
gofastmercury is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Raced an LS-1 Powered Chicken Truck! Mercury Stang Stories 26 02-15-2004 11:54 PM
Bought a truck Today. Coupe Devil Blue Oval Lounge 16 01-31-2002 05:07 PM
Turbo truck goes down hard. 5ohCOUPE Stang Stories 8 12-03-2001 12:14 AM
I got my truck! Finally a true Blue Oval family!!!!! Mike Souslin Blue Oval Lounge 3 08-10-2001 09:25 PM
Welcome truck owners! StangFlyer Built Ford Tough 8 02-11-2001 01:43 PM


All times are GMT -5. The time now is 04:28 AM.


SEARCH