Rear SN95 Seats in Fox Notch...Update!

Mustangbelle306 · 11-19-2002, 01:21 PM

Makin' good on my promise to pop back in and post these pics for the other members who are attempting to fit SN95 seats in a Fox (FiveOhPatrol was it you???)

Anyways, I can't remember exactly who it was, but I've attached pics of my current progress on fitting the seats, what a pain in the ***! I had to shorten the rear cushions about 1 inch, and cut the sides of either cushion and extend them about 3 inches, and add padding to that extension, then sew the whole deal back up! Confusing enough??? Check the pics, maybe you can see what I mean...It looks pretty decent, and once I get the fit perfect, I will touch up the seams and make it all purty! Any questions can be sent to Mustangbelle_306@yahoo.com

Mustangbelle306 · 11-19-2002, 01:22 PM

Again...

Mustangbelle306 · 11-19-2002, 01:23 PM

One more to go...

Mustangbelle306 · 11-19-2002, 01:24 PM

Last one. I'm not a professional seamstress, and it beats paying an upholstery shop! I think it looks neater to fab the rear seat rather than just throwing a seat delete into the mix.

1969Mach1 · 11-19-2002, 01:44 PM

VERY SWEET BELLE! AND IT'S GRRRREAT TO SEE YOU BACK! =) hehehe.. I came on to check if anything was new and I seen a thread by you.

I'm like no way! hehehe... =) What's new and exciting?

Sam.

Eric4Nitrous · 11-19-2002, 01:52 PM

yeah it's good to see you back..how you doin?

MidNiteBlu 5.0 · 11-19-2002, 02:40 PM

Those look really nice

I hope you and Matt decide to stay awhile. You two have been missed.

Mustangbelle306 · 11-19-2002, 02:48 PM

Oh, I didn't mean to give anyone the wrong idea. I'm not, as you say, "returning" to Mustangworks.

I just promised a long time ago that I would post pics when I had completed modifying the rear notch seats. Since I didn't remember which member requested them, I just went ahead and posted them.

Thanks, and take care.

Belle

tireburner163 · 11-19-2002, 04:15 PM

Hi Hon,

Looks great. I think the color goes will with the interior in Matt's car. Great job.

Take it easy
Josh, aka the tireburner

fiveohpatrol · 11-19-2002, 06:44 PM

Yeah it was me

thanks so much for popping back in to post the pics.

I'm not sure if I wanna try to tackle the job or not, as I almost never have backseat passengers, so I was just thinking about deleting it with some particle board and carpet. But ya never know when I will need that back seat

thanks again Belle

Eric4Nitrous · 11-19-2002, 11:23 PM

My guess is..not anytime soon Drew

fiveohpatrol · 11-19-2002, 11:57 PM

well atleast my car exists

Eric4Nitrous · 11-20-2002, 12:19 AM

ohh that was low.

fiveohpatrol · 11-20-2002, 12:55 AM

dont get your g-string in a bunch, i'm just messin with ya

Crazy Horse GT · 11-20-2002, 01:56 AM

Quote:

Originally posted by fiveohpatrol
Yeah it was me thanks so much for popping back in to post the pics.

I'm not sure if I wanna try to tackle the job or not, as I almost never have backseat passengers, so I was just thinking about deleting it with some particle board and carpet. But ya never know when I will need that back seat

thanks again Belle

hey man, you may wanna check out the 99+ rear seat, they are more narrow , just a thought, l8ter.

84LX89GT · 11-20-2002, 07:45 PM

Hi belle, that looks like some good tailoring you did there, bye again belle.

Motorhead302 · 11-20-2002, 08:19 PM

wow, that looks awesome. that's a really nice show-style touch too, to add to the look of sn95 seats up front. i never would've thought of that, but i might have to give it a try now, that looks awesome. and i bet those are more comfortable than the stock fox back seat.

The Deuce · 11-20-2002, 08:24 PM

Quote:

Originally posted by Crazy Horse GT
hey man, you may wanna check out the 99+ rear seat, they are more narrow , just a thought, l8ter.

I think the problem is that the SN95 seats were too narrow to begin with. I've never had use for them anyway though, somebody could probably just have mine.

11-19-2002, 01:44 PM	#5
1969Mach1 HEY I CAN SET A NAME NOW! Join Date: Oct 2001 Location: Ontario, Canada Posts: 2,556	VERY SWEET BELLE! AND IT'S GRRRREAT TO SEE YOU BACK! =) hehehe.. I came on to check if anything was new and I seen a thread by you. I'm like no way! hehehe... =) What's new and exciting? Sam. __________________ 1969 Mustang Mach 1Sold 351-4V Windsor, 4 Speed MACH 1 - Moving At The Speed Of Sound. 1979 Mustang Indianapolis 500 Pace Car For Sale - Email me for Info 302-2V, 3-Speed Auto One of 2,106 made One of 405 sent to Canada. Yes those are caution lights, and No you can't pass me when there on. Ricer Hater's Club - Member #4

11-19-2002, 01:52 PM	#6
Eric4Nitrous Registered Member Join Date: Jan 2002 Location: Va Posts: 1,122	yeah it's good to see you back..how you doin? __________________ 68 Camaro Gene Fulton 632ci Two stages of Jug 8.41 164mph Rockingham 1-26-03

11-19-2002, 02:40 PM	#7
MidNiteBlu 5.0 I got something to say Join Date: Sep 2001 Location: San Diego, CA Posts: 1,557	Those look really nice I hope you and Matt decide to stay awhile. You two have been missed. __________________ 91 LX Hatch 5.0 - made for the twisties 89 LX Hatchback 5.0 5spd. stolen/stripped 4/7/05 http://www.mustangworks.com/cgi-bin/...splay.cgi?3494 1987 Toyota Pickup Ricer Haters Club Member #33 Want a custom gauge cluster for your Vintage Mustang? www.jmeenterprises.com

11-19-2002, 04:15 PM	#9
tireburner163 It's a lot like a race car Join Date: Aug 2000 Location: Meridian, MS Posts: 4,130	Hi Hon, Looks great. I think the color goes will with the interior in Matt's car. Great job. Take it easy Josh, aka the tireburner __________________ 1987 Buick T-type 1998 HD Electra Elide

11-19-2002, 06:44 PM	#10
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	Yeah it was me thanks so much for popping back in to post the pics. I'm not sure if I wanna try to tackle the job or not, as I almost never have backseat passengers, so I was just thinking about deleting it with some particle board and carpet. But ya never know when I will need that back seat thanks again Belle __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

11-19-2002, 02:48 PM	#8
Mustangbelle306 Yay for Chickys Join Date: Feb 2001 Posts: 1,532	Oh, I didn't mean to give anyone the wrong idea. I'm not, as you say, "returning" to Mustangworks. I just promised a long time ago that I would post pics when I had completed modifying the rear notch seats. Since I didn't remember which member requested them, I just went ahead and posted them. Thanks, and take care. Belle

11-19-2002, 11:23 PM	#11
Eric4Nitrous Registered Member Join Date: Jan 2002 Location: Va Posts: 1,122	My guess is..not anytime soon Drew __________________ 68 Camaro Gene Fulton 632ci Two stages of Jug 8.41 164mph Rockingham 1-26-03

11-19-2002, 11:57 PM	#12
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	well atleast my car exists __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

11-20-2002, 12:19 AM	#13
Eric4Nitrous Registered Member Join Date: Jan 2002 Location: Va Posts: 1,122	ohh that was low. __________________ 68 Camaro Gene Fulton 632ci Two stages of Jug 8.41 164mph Rockingham 1-26-03

11-20-2002, 12:55 AM	#14
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	dont get your g-string in a bunch, i'm just messin with ya __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

11-20-2002, 07:45 PM	#16
84LX89GT Mustangs Join Date: Jul 2000 Posts: 1,938	Hi belle, that looks like some good tailoring you did there, bye again belle. __________________ 2005 Suzuki Hayabusa GSX1300-R 1980 Ford Thunderbird - 255 V8 ported heads, 5.0L ported stock headers, O.R. H-pipe and Flowmaster 2-chambers, dual roller timing chain hi-po Mack Truck hood emblem 1985 Mustang GT 5.0L T5, F-303, GT40p, headers, off-road h, flowmasters, MSD stuff, etc. Sold 02/06/04 1989 Mustang GT ET: 13.304@102.29 mph (5-24-03) Sold - 1998 Mustang Cobra coupe, 1/4 mile - street tires: 13.843@103.41 (bone stock)

11-20-2002, 08:19 PM	#17
Motorhead302 Registered Member Join Date: Jul 1999 Location: Fort Wayne, IN Posts: 264	wow, that looks awesome. that's a really nice show-style touch too, to add to the look of sn95 seats up front. i never would've thought of that, but i might have to give it a try now, that looks awesome. and i bet those are more comfortable than the stock fox back seat. __________________ Proud to be Rice Haters' Club member # 88, 95 GT, Pulleys, Headers, Off-road H, 3.55's, Tremec 3550, Cobra Clutch 14.4's @ 96mph before exhaust. '92 LX, 4.10's, Underdrives, Off-road, Flowmaster 2 Chambers, Chrome Cobra R Wheels NEW TIMES: 8.694@78.7, 13.694@97.76

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SVO Rear Seats	shooter1	Small Ponies	2	05-07-2004 08:09 PM
SN95 Seats in a Fox Body??	Mustangbelle306	Blue Oval Lounge	13	06-30-2002 10:23 PM
Rear Speaker options for 90 LX Notch???	Chevyguy	Audio, Security, & Electronics	3	11-01-2001 07:50 PM
will sn95 convert rear seats fit in a sn93 convert???	LX XLR8R	Windsor Power	4	06-05-2001 10:22 PM
Lightweight/corbeau rear seats???	bada$$lx	Windsor Power	0	04-19-2001 04:25 PM