Will SN95 headers fit a Fox body?

Bad89stang · 03-15-2002, 12:49 AM

My father in law bought some BBK unequal length headers that came from a 94. He was not aware of the EGR fitting that the SN95 headers have on them. Can they be made to fit his 92 coupe? Can we just weld the opening shut? Are the headers the same other than that? Any info would be helpful. Thanks.

andy669 · 03-15-2002, 08:41 AM

Yes they are the same other than the EGR fitting. I have never put SN95 headers on a fox, but I have put fox headers on my 94.

andy

LX XLR8R · 03-15-2002, 02:29 PM

Quote:

Originally posted by andy669
Yes they are the same other than the EGR fitting. I have never put SN95 headers on a fox, but I have put fox headers on my 94.

andy

were they long tubes..that be great if fox longtubes will fit on a 94-95..one less thing to worry about..damn EGR

andy669 · 03-15-2002, 06:29 PM

Quote:

Originally posted by LX XLR8R

were they long tubes..that be great if fox longtubes will fit on a 94-95..one less thing to worry about..damn EGR

Nope, they were shorties. I cant think of any reason why the long tubes would not fit, but I'm not 100% sure they would. You would still need a SN95 H or X pipe though because of the different hangers.

andy

Dark Knight · 03-17-2002, 11:47 AM

if you look, you can get an AN cap that will thread on the EGR tube... or a pipe thread one... cant remember which it is off hand... looks better than welding it up... also.. I had 94-95 headers and a fox 2 1/4 dynomax h-pipe.. the ball on the later headers was 2 1/2... the h-pipe was 2 1/4... of course, the studs on my BBK's were bigger than the studs on the stock sn95 headers too.... I ended up having new down tubes for the H-pipe made... no biggie.. cost around $40,,,

03-15-2002, 12:49 AM	#1
Bad89stang Registered Member Join Date: Aug 2001 Location: Ft. Worth, TX Posts: 456	Will SN95 headers fit a Fox body? My father in law bought some BBK unequal length headers that came from a 94. He was not aware of the EGR fitting that the SN95 headers have on them. Can they be made to fit his 92 coupe? Can we just weld the opening shut? Are the headers the same other than that? Any info would be helpful. Thanks. __________________ You're gonna need your seatbelt

03-15-2002, 08:41 AM	#2
andy669 Registered Member Join Date: Jan 2001 Location: Moline Il Posts: 901	Yes they are the same other than the EGR fitting. I have never put SN95 headers on a fox, but I have put fox headers on my 94. andy __________________ 88 coupe 91 LX NMRA Pure Street 5120

03-17-2002, 11:47 AM	#5
Dark Knight Registered Member Join Date: Oct 1998 Location: Az Posts: 854	if you look, you can get an AN cap that will thread on the EGR tube... or a pipe thread one... cant remember which it is off hand... looks better than welding it up... also.. I had 94-95 headers and a fox 2 1/4 dynomax h-pipe.. the ball on the later headers was 2 1/2... the h-pipe was 2 1/4... of course, the studs on my BBK's were bigger than the studs on the stock sn95 headers too.... I ended up having new down tubes for the H-pipe made... no biggie.. cost around $40,,, __________________ 84 convt,roller 302,AFR's, performer 3.55's, underdrives BBK shorties stock cam, 1.7's 13.58@102.84 and a '68 stang .. project 8 sec street car... 557 big block + N20 :-) http://members.cox.net/darkknight302/68nwrear.jpg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Throttle Body & Idle Conrol Valve Info	BigBobsL	Windsor Power	2	02-10-2004 01:16 AM
SN95 body with skinnies up front	todd95GT	Windsor Power	0	09-19-2002 09:51 AM
SN95 Seats in a Fox Body??	Mustangbelle306	Blue Oval Lounge	13	06-30-2002 10:23 PM
Headers	saleen243	Classic Mustangs	1	03-18-2002 02:55 PM
sn95 interior in a fox body can anyone help	vlahos19	Windsor Power	1	03-04-2002 03:21 PM