Wiring Harness???

jseaton · 05-16-2001, 03:18 PM

If I disconnect the wiring harness that goes across a 1988 stang's firewall towards the passenger side, will everything else work??? I have converted this car to carburation by the way. All of my ignition is self powered. Thanks!!!!!!!!

------------------
82- 347, SVO A4, Scat Billet Crank, Crower Rods, Nowak Pistons, TFS Heads W/Crower Stainless Rockers, Victor Intake, Gold Claw, Paxton Fuel system, MSD ignition,

82 GT · 05-16-2001, 09:55 PM

I don't know the answer to your question but I have noticed that no one on this board likes to reply to wiring questions. I have posted several and got no replies.
It would be nice to have an electrical guru on this board.
It almost makes you wonder how they wired all their cars when they built them....hmmm

------------------
'82 GT 351W C-4,BBK headers,Carter 625 carb,Comp.Cam,Flowmaster exhaust.
1988 GT...T-5,bone stock

jseaton · 05-17-2001, 09:48 AM

Yes, you are correct. I have a copy of the schematics but they are too small to read. I am trying to find the drawings on AutoCad or something like that so I can print them out on a C or D size paper for better visibility.

I like there really should be a message board that is for high tech questions only like electrical, engine building- engineering stuff.

------------------
82- 347, SVO A4, Scat Billet Crank, Crower Rods, Nowak Pistons, TFS Heads W/Crower Stainless Rockers, Victor Intake, Gold Claw, Paxton Fuel system, MSD ignition,

82 GT · 05-17-2001, 11:47 AM

Do you have a scanner? You could scan them and then you should be able to magnify them with the scanner software.

jseaton · 05-17-2001, 11:51 AM

Yes I do but the scematics I have are very small and kind of blury. Also, if I had them on AutoCad, I could mofify them for a stripped down version and do all kinds of cool things.....

------------------
82- 347, SVO A4, Scat Billet Crank, Crower Rods, Nowak Pistons, TFS Heads W/Crower Stainless Rockers, Victor Intake, Gold Claw, Paxton Fuel system, MSD ignition,

05-16-2001, 03:18 PM	#1
jseaton Registered Member Join Date: Sep 1998 Location: carrollton,texas,usa Posts: 59	Wiring Harness??? If I disconnect the wiring harness that goes across a 1988 stang's firewall towards the passenger side, will everything else work??? I have converted this car to carburation by the way. All of my ignition is self powered. Thanks!!!!!!!! ------------------ 82- 347, SVO A4, Scat Billet Crank, Crower Rods, Nowak Pistons, TFS Heads W/Crower Stainless Rockers, Victor Intake, Gold Claw, Paxton Fuel system, MSD ignition,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can I use the front wiring harness from my V6 on my V8?	EazyE-CPT	Windsor Power	0	08-19-2002 11:42 AM
What kind of wiring harness and computer do I need for my '86?	EazyE-CPT	Windsor Power	2	07-22-2002 02:46 PM
Which wiring harness and computer do I have to have?	EazyE-CPT	Windsor Power	0	07-21-2002 11:33 PM
whats up with this wiring harness?	LX XLR8R	Windsor Power	3	08-17-2001 10:53 AM
Underdash Wiring Harness for 68	Kisner	Classic Mustangs	3	04-28-2001 09:33 PM

05-16-2001, 09:55 PM	#2
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	I don't know the answer to your question but I have noticed that no one on this board likes to reply to wiring questions. I have posted several and got no replies. It would be nice to have an electrical guru on this board. It almost makes you wonder how they wired all their cars when they built them....hmmm ------------------ '82 GT 351W C-4,BBK headers,Carter 625 carb,Comp.Cam,Flowmaster exhaust. 1988 GT...T-5,bone stock

05-17-2001, 09:48 AM	#3
jseaton Registered Member Join Date: Sep 1998 Location: carrollton,texas,usa Posts: 59	Yes, you are correct. I have a copy of the schematics but they are too small to read. I am trying to find the drawings on AutoCad or something like that so I can print them out on a C or D size paper for better visibility. I like there really should be a message board that is for high tech questions only like electrical, engine building- engineering stuff. ------------------ 82- 347, SVO A4, Scat Billet Crank, Crower Rods, Nowak Pistons, TFS Heads W/Crower Stainless Rockers, Victor Intake, Gold Claw, Paxton Fuel system, MSD ignition,

05-17-2001, 11:47 AM	#4
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	Do you have a scanner? You could scan them and then you should be able to magnify them with the scanner software.

05-17-2001, 11:51 AM	#5
jseaton Registered Member Join Date: Sep 1998 Location: carrollton,texas,usa Posts: 59	Yes I do but the scematics I have are very small and kind of blury. Also, if I had them on AutoCad, I could mofify them for a stripped down version and do all kinds of cool things..... ------------------ 82- 347, SVO A4, Scat Billet Crank, Crower Rods, Nowak Pistons, TFS Heads W/Crower Stainless Rockers, Victor Intake, Gold Claw, Paxton Fuel system, MSD ignition,