Remote Optimizer??

SaleenGTS · 02-13-2004, 01:38 AM

Does anyone know how to work this? It is the new Pro-M Remote Optimizer. I have a 77mm calibrated for 42's. I run 24's with a FMU. I hooked this up and it would idle, very rich, but it would idle. I tried to drive it and if I gave it ANY gas, it would choke out and die....any suggestions?

I hooked my 70 back up and WHAM, it ran fine!

In desperate need!

SaleenGTS · 02-15-2004, 01:20 PM

thanks for the advice guys!

302 LX Eric · 02-16-2004, 09:08 AM

Quote:

Originally posted by SaleenGTS
thanks for the advice guys!

Have you called Pro-M? I met the owner at FFW in Norwalk last year and he was very helpful and knowledgable. I'd give him a quick call and see if he can help you.

E

LX5liter · 02-16-2004, 11:21 AM

It was my understanding that the remote optimizers were just for fine tuning the calibration between injectors and MAF. They didn't have the adjustment for totally different injector sizes. Now they may have changed them since they first came out so check with Pro-M first like Eric said.

mustangman4 · 02-17-2004, 03:01 AM

Are there two dials on it with ports to plug in a DVOM? If so one dial should be idle and the other high speed. You will need to know Air/Fuel ratio or be able to measure Exhaust Gas Temp to be able to fine tune it. But you should be able to lean it out far enough to make it run. Obviously you will need to adjust it down as far as it will go if you are running that rich at idle.

Murdock · 02-17-2004, 06:42 PM

Hi Dustin-

Set the "HIGH SPD" to 1.75

With the car running and the VOM meter hooked up and set on volts set the "IDLE" to 0.7-0.9v.

Do this with the car at running temp. and after the desired idle is set on the throttle body.

If you have any questions fill free to PM me.

02-13-2004, 01:38 AM	#1
SaleenGTS RICE taste like Chicken Join Date: Jun 2000 Location: Edmond, OK Posts: 687	Remote Optimizer?? Does anyone know how to work this? It is the new Pro-M Remote Optimizer. I have a 77mm calibrated for 42's. I run 24's with a FMU. I hooked this up and it would idle, very rich, but it would idle. I tried to drive it and if I gave it ANY gas, it would choke out and die....any suggestions? I hooked my 70 back up and WHAM, it ran fine! In desperate need! __________________ Dustin 89 Saleen GT Sport Supercharged 306 Started her up 6/8/03 Old Motor Supercharged 347 516 rwhp 553 rwtq 11.249@126.83 1997 Honda CBR 1100XX Super Blackbird 162 hp

02-15-2004, 01:20 PM	#2
SaleenGTS RICE taste like Chicken Join Date: Jun 2000 Location: Edmond, OK Posts: 687	thanks for the advice guys! __________________ Dustin 89 Saleen GT Sport Supercharged 306 Started her up 6/8/03 Old Motor Supercharged 347 516 rwhp 553 rwtq 11.249@126.83 1997 Honda CBR 1100XX Super Blackbird 162 hp

02-16-2004, 11:21 AM	#4
LX5liter dude5l Join Date: May 2001 Location: Grande Prairie, Alberta, Canada Posts: 603	It was my understanding that the remote optimizers were just for fine tuning the calibration between injectors and MAF. They didn't have the adjustment for totally different injector sizes. Now they may have changed them since they first came out so check with Pro-M first like Eric said. __________________ Good luck! Brad R. 1992 L.X. 5.0 coupe MODS: A few little bolt ons New Best time ...11.60 @ 128 mph @ 2000+ ft altitude. Rice Haters Club member #39 Users rides #2542

02-17-2004, 03:01 AM	#5
mustangman4 Registered Member Join Date: Feb 2003 Location: Oshkosh WI Posts: 69	Are there two dials on it with ports to plug in a DVOM? If so one dial should be idle and the other high speed. You will need to know Air/Fuel ratio or be able to measure Exhaust Gas Temp to be able to fine tune it. But you should be able to lean it out far enough to make it run. Obviously you will need to adjust it down as far as it will go if you are running that rich at idle. __________________ 93 GT 306 DSS, O-Ringed, AFR 185's, Pro Products Intakes, 55lb low imp inj, 80mm Pro-M meter, 2004 PMS, AFM Power Pipe, Kirban Reg, Vortech S-Trim 14lbs. No times yet. Trying to tune.

02-17-2004, 06:42 PM	#6
Murdock Registered Member Join Date: Dec 2002 Location: Columbus, OH Posts: 100	Hi Dustin- Set the "HIGH SPD" to 1.75 With the car running and the VOM meter hooked up and set on volts set the "IDLE" to 0.7-0.9v. Do this with the car at running temp. and after the desired idle is set on the throttle body. If you have any questions fill free to PM me. __________________ LARZRACECARS larzracecars.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pro M Optimizer Experience Needed	Mustvid	Windsor Power	1	10-04-2004 03:17 PM
remote turn on lead	spydar336	Audio, Security, & Electronics	1	12-21-2003 09:20 PM
Pro M remote Optimizer?	Saleen367	Windsor Power	3	08-10-2001 01:03 AM
Remote Battery Cut off Switch	1988GTCONERTIBLE	Windsor Power	3	06-07-2001 07:19 PM
Tokico Illumina 5-Way Adj. Remote adjuster	CO Stang	Classic Mustangs	1	03-13-2001 06:30 PM