View Single Post
Old 02-03-2003, 10:44 PM   #4
hobgoblin351
Registered Member
 
Join Date: Sep 2002
Location: NYC
Posts: 245
Default

Hey thanks for the input! The stock speaker sizes for that year sucked!! They had one stock in the dask I think it was a 5 by 7. In the doors there were also 4 by 6's but they were placed in the lower rear of the door. The sound goes right into the seat cushion! You should be able to put 6 by 9's in the rear deck though. I cut holes in the lower front of the doors to mount speakers. You have to cut the panel and the door itself. I cant remember offhand how big they were 4" maybe 5"'s. I'd look for ya but the car is stored for the winter. The thing is you have to be careful with the fronts because the door regulator clearence. You cant go all that deep into the door 2 maybe 3 inches depending on the size of the magnet. Also you have to be aware of the regulator handle on the outside. It's got to be able to turn and not hit the speaker cover! Unless of course you put in power windows!
About the sub, I really dont want to use a tube. But, I can't figure out a place to mount a box. If he's got a 70 look in the trunk and see what you think. I've got the battery mounted on the passanger side next to the wheel well. You cant mount it to the damn trunk! do you think it would fit on the driver side wheelwell? 10" maybe but a 12" I dont know
__________________
1970 Stang Conv:
en:Boss351 (balanced/blueprinted)
mech cam(240*@.050/.540 lift)
Scrw in studs/comp cams rllr rkr
Mldn valves 2.19in 1.71ex
ported polished cc'd hrdnd ex
Keith Black FT pistons(10.25/1)
Weiand Excellorator manifold
Holley700 DP mech 2nds
MSD 6 box and Dis
Headers/2 1/2 inch duels
tr: modified FMX
re:9-inch/3.89 limited slip
hobgoblin351 is offline   Reply With Quote