mild cam for my mostly stock car.

zepherman · 04-19-2002, 12:43 AM

was thinking of a cam change for my car. the motor is pretty much stock. Which one of the ford cams would help. should i just stick with the stock cam.

Thanks

cyberstang5.0 · 04-19-2002, 07:21 AM

Well, if your looking for specifically a FORD cam, I would say a B303 cam would work for ya....

I on the other hand recomend Lunati cams... www.lunati.com

If you call Jim Cook, he can tell you exactly what cam you should get. All you have to do is tell him what you have and what you are looking for in a cam (loppy idle, duration, etc....)

04-19-2002, 12:43 AM	#1
zepherman Registered Member Join Date: May 2001 Location: Oklahoma City OK USA Posts: 236	mild cam for my mostly stock car. was thinking of a cam change for my car. the motor is pretty much stock. Which one of the ford cams would help. should i just stick with the stock cam. Thanks __________________ 90 GT 25th Anni. Did the AOD to T-5 swap, SPEC clutch, Steeda Tri-Ax shifter, BBK 2½ inch off-road H pipe, Flows, BBK 70mm TB/EGR, Ford Racing aluminim driveshaft, 3.55's, welded subframes, Ram Air, 3 core radiator, NOS dry kit 75 shot, and a K&N filter. 12.9 @ 108

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stock Tire Sizes	GhettoPop	Windsor Power	8	01-19-2003 07:22 PM
AFR 165's or other heads with cam and stock induction	Mustang_GT_90	Windsor Power	27	11-25-2002 03:01 PM
Suspension ?--Bullitt, Eibach, Stock, or COMBO???	rel3rd	Windsor Power	3	10-15-2002 07:53 PM
bbk unequals and stock H pipe :(	scale	Windsor Power	4	06-14-2002 11:41 AM
LT's vs. shorties vs. stock headers	jonnyk	Windsor Power	9	01-01-2001 11:28 AM

04-19-2002, 07:21 AM	#2
cyberstang5.0 347ci of HORSE POWER!!! Join Date: Jul 2001 Location: Houston, TX Posts: 1,416	Well, if your looking for specifically a FORD cam, I would say a B303 cam would work for ya.... I on the other hand recomend Lunati cams... www.lunati.com If you call Jim Cook, he can tell you exactly what cam you should get. All you have to do is tell him what you have and what you are looking for in a cam (loppy idle, duration, etc....)