GT turn signals

meknized · 06-03-2007, 06:09 PM

Hello, I'm having a weird problem with my turn signals on my 89 GT. I was driving down the road the other day and the turn signals wouldn't work. About 20 minutes later of driving they started working again. The next day the same thing intermittently. So of course I figured it was the flasher, so I bought a new one and they still don't work. Any ideas?

meknized · 06-07-2007, 02:06 PM

Alright, I figured out what the problem was. I had to dig out the wiring schematic book and trace wires through it. There are three wires from the flasher, two purple with orange stripes and a blue one. I was able to find that the blue wire eventually goes to the hazard flasher switch. I pulled the switch out and sure enough this blue wire had come out of the back. I pushed it back in and the turn signals worked, thank God.

USMC302 · 06-30-2007, 08:06 PM

Awesome, I was gonna say take a look at the flasher....

06-03-2007, 06:09 PM	#1
meknized fox fanatic Join Date: Jul 2004 Location: wichita Ks. Posts: 61	GT turn signals Hello, I'm having a weird problem with my turn signals on my 89 GT. I was driving down the road the other day and the turn signals wouldn't work. About 20 minutes later of driving they started working again. The next day the same thing intermittently. So of course I figured it was the flasher, so I bought a new one and they still don't work. Any ideas? __________________ meknized Blue/silver 89 GT, Coast 331, ported GT-40x heads, X cam, cobra intake, 70mm TB, 75mm bullet, mac intake, 24lb inj, 255 lph fuel pump, accufab regulator, pulleys, MSD coil, 6AL, 300+ wires, Tremec 5 spd. pro 5.0 shifter, FMS drive shaft, headers, X-pipe, flowmasters, auburn pro series posi. moser 31s axles,3:73s, etc. Best ET 12.02@112.5 a pic A vid of a run:http://www.youtube.com/watch?v=l9JMcErxML8

06-07-2007, 02:06 PM	#2
meknized fox fanatic Join Date: Jul 2004 Location: wichita Ks. Posts: 61	Re: GT turn signals Alright, I figured out what the problem was. I had to dig out the wiring schematic book and trace wires through it. There are three wires from the flasher, two purple with orange stripes and a blue one. I was able to find that the blue wire eventually goes to the hazard flasher switch. I pulled the switch out and sure enough this blue wire had come out of the back. I pushed it back in and the turn signals worked, thank God. __________________ meknized Blue/silver 89 GT, Coast 331, ported GT-40x heads, X cam, cobra intake, 70mm TB, 75mm bullet, mac intake, 24lb inj, 255 lph fuel pump, accufab regulator, pulleys, MSD coil, 6AL, 300+ wires, Tremec 5 spd. pro 5.0 shifter, FMS drive shaft, headers, X-pipe, flowmasters, auburn pro series posi. moser 31s axles,3:73s, etc. Best ET 12.02@112.5 a pic A vid of a run:http://www.youtube.com/watch?v=l9JMcErxML8

06-30-2007, 08:06 PM	#3
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: GT turn signals Awesome, I was gonna say take a look at the flasher.... __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
turn signals quit working	Hethj7	Windsor Power	4	09-29-2002 06:11 PM
How to turn 302 into 347?	zepherman	Blue Oval Lounge	2	08-21-2001 12:50 PM
no turn signals	Brian88	Windsor Power	5	08-08-2001 11:59 AM
Turn Signals	gentb	Windsor Power	12	05-10-2001 12:06 AM
Turn signals	David Fulford	Classic Mustangs	5	03-01-2001 10:00 AM