Installing aftermarket fuel filter

04-02-2002, 09:35 PM

Im wondering if it is possible to hook up a PermaCool fuel filter/water seperater to the stock ford lines on a 95 GT. Any help would be appreciated.

fiveohpatrol · 04-02-2002, 09:41 PM

If they make one thats the same dimensions as the factory fuel filter then yes. But if not, then don't try any "modifications" to your fuel line. Its a pressurized system and won't take kindly to any cutting or such.

hope this helps
-Drew

avbcon12 · 04-02-2002, 09:44 PM

listen to Drew, and also take into consideration of the flow capabilities of different fuel filters in regards to pressure...

take care,
adam

04-02-2002, 09:44 PM

Thats why i havent attempted it yet. The problem is that i have the darn thing sitting in my garage and ive had it so long i cant return it. I was hoping that maybe someone might know where i could get a fitting the was the same as the factory ford fitting. Thats probably a serious long shot.

04-02-2002, 09:35 PM	#1
Mustang Cain Guest Posts: n/a	Installing aftermarket fuel filter Im wondering if it is possible to hook up a PermaCool fuel filter/water seperater to the stock ford lines on a 95 GT. Any help would be appreciated.

04-02-2002, 09:41 PM	#2
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	If they make one thats the same dimensions as the factory fuel filter then yes. But if not, then don't try any "modifications" to your fuel line. Its a pressurized system and won't take kindly to any cutting or such. hope this helps -Drew __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

04-02-2002, 09:44 PM	#3
avbcon12 Registered Member Join Date: Jul 2001 Location: West Bloomfield, MI Posts: 391	listen to Drew, and also take into consideration of the flow capabilities of different fuel filters in regards to pressure... take care, adam __________________ 90 GT black/ grey leather ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc.... http://avbcon12.stangnet.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Installing transmission filter	82 GT	Windsor Power	3	10-18-2003 07:21 PM
fuel pressure issues	mustang98gt	Modular Madness	3	07-05-2003 10:43 PM
Installing Fuel Pump.....have ????'s	MattwantsSpeed	Windsor Power	24	07-18-2002 01:01 PM
Fuel Filter ?	5.0PiMpin	Windsor Power	5	11-21-2001 03:30 PM
Installing a fuel pressure regulator	moponys	Windsor Power	7	07-20-2001 09:36 PM