Ford Extreme Performance Engine Control System

92Rustang · 03-17-2001, 07:34 PM

Is anyone using this it sounds like a Anderson PMS? Ford sales it for $250 you just need a laptop. I was wondering how easy it is to use and is it worth it? Check it you at http://www.oemfordparts.com/partdeta...&CategoryID=13

------------------
Check my site for mod
www.fordmustanggt.com

DirtKing · 03-17-2001, 07:54 PM

That price is just for the harness kit...the unit sells for about 1200 bucks. it is an awesome unit though!

------------------
88LX notch, Speedpro EFI Procharged!

84_GT350 · 03-18-2001, 03:36 AM

Hell...if those things were only $250 they'd be on every Mustang from coast to coast. More in the neghborhood or $900-$1300 depending where you buy. Plus you'll need a laptop to tune it and do data logging. But if you've got the time and the know-how it's really hard to beat. The PMS system is a bit easier to use and acts as an interface between your factory computer and all your sensors. For user friendlyness it's definitely high on the list. WMS also sells an SDS Injection system that I'm looking into for my project this summer (it can be run without an EEC...which you need for the PMS) since it doesn't use a laptop and looks easy as hell to use. Dirtking should know that Speedpro makes a comparable system to the EPEC computer....allbeit more expensive. Also a laptop programmable piece. So is Fel-Pro's SEFI8LO system.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

03-17-2001, 07:34 PM	#1
92Rustang Registered Member Join Date: Feb 1999 Location: Smithton, IL, US Posts: 215	Ford Extreme Performance Engine Control System Is anyone using this it sounds like a Anderson PMS? Ford sales it for $250 you just need a laptop. I was wondering how easy it is to use and is it worth it? Check it you at http://www.oemfordparts.com/partdeta...&CategoryID=13 ------------------ Check my site for mod www.fordmustanggt.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Safety Issue 64 - 70 Mustangs	Mach1 Cobra Jet	Classic Mustangs	20	07-11-2005 08:06 PM
Cobra Engine Swap...Ways to improve my 98 GT...	xtrememach1racer	Modular Madness	3	10-31-2002 11:23 AM
Python Venom 400 Performance Control Module??	shelby2	Windsor Power	0	10-24-2001 12:16 AM
3.8 engine questions	MY PRIZE	Modular Madness	2	01-19-2001 07:28 AM
R2000 cleaning system for engine???	fongo	Windsor Power	1	01-04-2001 06:21 PM

03-17-2001, 07:54 PM	#2
DirtKing Registered Member Join Date: Feb 1999 Location: brooklyn center,mn,USA Posts: 169	That price is just for the harness kit...the unit sells for about 1200 bucks. it is an awesome unit though! ------------------ 88LX notch, Speedpro EFI Procharged!

03-18-2001, 03:36 AM	#3
84_GT350 Registered Member Join Date: Apr 1999 Location: Overland Park, KS, USA Posts: 1,631	Hell...if those things were only $250 they'd be on every Mustang from coast to coast. More in the neghborhood or $900-$1300 depending where you buy. Plus you'll need a laptop to tune it and do data logging. But if you've got the time and the know-how it's really hard to beat. The PMS system is a bit easier to use and acts as an interface between your factory computer and all your sensors. For user friendlyness it's definitely high on the list. WMS also sells an SDS Injection system that I'm looking into for my project this summer (it can be run without an EEC...which you need for the PMS) since it doesn't use a laptop and looks easy as hell to use. Dirtking should know that Speedpro makes a comparable system to the EPEC computer....allbeit more expensive. Also a laptop programmable piece. So is Fel-Pro's SEFI8LO system. ------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s