MustangWorks.com : Ford Forums - View Single Post

worked95 · 04-17-2005, 05:49 PM

Jester,
I cut the battery cable about 8 in from the battery and installed a distribution panel. The panel takes the battery cable as input and provides multiple outputs for anything you want including the original battery cable you just cut. I added a fuseholder (with 30 amp fuse) to the run of cable for the amps. The fuseholder is installed inside the engine compartment. I then found an existing hole in the firewall where alot of other stock cables passed thru and passed thru the amp cable.

hope this helps.

worked95

04-17-2005, 05:49 PM	#4
worked95 Registered Member Join Date: Apr 2005 Posts: 6	Re: Wire route for aftermarket amp in '95 Jester, I cut the battery cable about 8 in from the battery and installed a distribution panel. The panel takes the battery cable as input and provides multiple outputs for anything you want including the original battery cable you just cut. I added a fuseholder (with 30 amp fuse) to the run of cable for the amps. The fuseholder is installed inside the engine compartment. I then found an existing hole in the firewall where alot of other stock cables passed thru and passed thru the amp cable. hope this helps. worked95