Front Bumper cover

White GT · 08-08-2004, 06:59 PM

I've saw some mustang with the same problem as mine. Front bumper do curves under the fog lamps. Not sure what it can be.

Maybe about the front shock bumper absorber.

My fog lamp are genuine Hella and they don't look like to be as far in the bumper as on others mustang

Here is my fog light

Here's what i look like on others

someone has already saw and solved this?

crazypete · 08-09-2004, 09:13 AM

These cars that we have are getting up there in age and this is normal.

If you think thats bad, you should see mine! I have wings down there and my foglights just google out at you. This is why I'm switching to the nicer earlier 85 bumpers.

Anyhow. This is the natural sag of the bumper. If you were so inclined, you could add a support under the foglights and run it up to the underside of the bumper or the foglight bar.

Good luck

White GT · 08-15-2004, 08:38 AM

Saw this.

Just come back from another mustang show at sanair and i think i found the problem

My car have been rebuilt in 1991 and maybe the absorber is not enough pulled. Does someone know how this part work. Look like it just two tubes. One in another and tight together.

Don't look like it can be changed. Does someone have the specs about how long this should be.

08-08-2004, 06:59 PM	#1
White GT Registered Member Join Date: Nov 1999 Location: At the north of the Maine Posts: 177	Front Bumper cover I've saw some mustang with the same problem as mine. Front bumper do curves under the fog lamps. Not sure what it can be. Maybe about the front shock bumper absorber. My fog lamp are genuine Hella and they don't look like to be as far in the bumper as on others mustang Here is my fog light Here's what i look like on others someone has already saw and solved this? __________________ 88 GT * And Risen from the dead * My GT My Web Page On Car domain Last edited by White GT; 08-08-2004 at 07:26 PM..

08-09-2004, 09:13 AM	#2
crazypete Registered Member Join Date: Sep 2002 Location: Boston Posts: 592	These cars that we have are getting up there in age and this is normal. If you think thats bad, you should see mine! I have wings down there and my foglights just google out at you. This is why I'm switching to the nicer earlier 85 bumpers. Anyhow. This is the natural sag of the bumper. If you were so inclined, you could add a support under the foglights and run it up to the underside of the bumper or the foglight bar. Good luck __________________ 91 GT Carb conversion, holley 600 double pumper, edelbrock performer intake, FMS "C" drop springs, march 1000 underdrive pullies, crane 1.7 roller rockers, GT-40P headers, bassani x pipe, american thunder catback, FMS 4.56's, msd aL6, trunkmount battery, A/C eliminator kit, 3000 stall tci streetfighter, AOD with transgo kit, A+ servo, 300M hardened lockup shaft, kevlar bands and 28,000 gvw trans cooler, 3 core radiator, 300 lbs stripped with a full interior

08-15-2004, 08:38 AM	#3
White GT Registered Member Join Date: Nov 1999 Location: At the north of the Maine Posts: 177	Saw this. Just come back from another mustang show at sanair and i think i found the problem My car have been rebuilt in 1991 and maybe the absorber is not enough pulled. Does someone know how this part work. Look like it just two tubes. One in another and tight together. Don't look like it can be changed. Does someone have the specs about how long this should be. __________________ 88 GT * And Risen from the dead * My GT My Web Page On Car domain

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front Bumper Cover	Phantom5oh	Appearance & Detailing	2	01-08-2003 02:50 AM
Can I remove the front bumper on my 91 GT without the cover saggin?	crazypete	Windsor Power	26	12-07-2002 01:35 PM
Front Bumper Cover Body Work	elmir50	Blue Oval Lounge	0	10-21-2001 06:37 PM
Treating/prepping the front bumper cover (grill) b4 painting	Fox Body	Appearance & Detailing	0	07-31-2001 09:58 AM
96' front bumper cover	mustang16	Appearance & Detailing	0	03-21-2001 02:57 PM