rear bumper

azyd · 03-11-2003, 09:22 AM

does any one know where i can get a rear bumper for a 2002 mustang gt that doesnt have any holes for the mufflers.

any kit any look will do, i want to put side mufflers, so i want a clean rear end.

thanks to any one that can help...

jj_jonathon · 03-13-2003, 01:11 AM

roush...cuz they put side exhaust on their stangs...itll say roush on it tho and itll be expensive...look around online for body kits, i can think of one other kit running around that uses side exhaust but i cant remember where from...just search for body kits or go with the roush one..

adamstang2001 · 03-13-2003, 08:21 AM

You could try to use a kit from Stallion or Xenon. I believe that both of those kits use the side exit exhaust.

sjlawr · 03-13-2003, 10:03 PM

Maybe you could try ordering one that goes on the V6 mustang, i think they are the same, but do not have cut outs.

jj_jonathon · 03-14-2003, 01:52 AM

i dont know stallion kits...but xenon is rear exhaust and the V6 rear has a cutout on the drivers side for the single tail pipe, even though its bent down...

jj_jonathon · 03-14-2003, 01:59 AM

sorry...i just searched around and the V6 bumper should work...it appears to have no cutouts...

they msrp for ~$325 but im sure you could find one cheaper...maybe a flawless one at a wrecker if youre lucky, or just order one from ford or online somewhere...

azyd · 03-14-2003, 01:25 PM

thanx guys i looked at all the bumpers and the all look good all i have to to do now is make a choice....

03-11-2003, 09:22 AM	#1 (permalink)
azyd Registered Member Join Date: Mar 2003 Location: clifton, nj Posts: 2	rear bumper does any one know where i can get a rear bumper for a 2002 mustang gt that doesnt have any holes for the mufflers. any kit any look will do, i want to put side mufflers, so i want a clean rear end. thanks to any one that can help...

03-13-2003, 01:11 AM	#2 (permalink)
jj_jonathon Trisket Join Date: May 2002 Location: University of Florida, FL Posts: ½ Posts: 1,561	roush...cuz they put side exhaust on their stangs...itll say roush on it tho and itll be expensive...look around online for body kits, i can think of one other kit running around that uses side exhaust but i cant remember where from...just search for body kits or go with the roush one.. __________________ University of Florida - Physics Major My 02GT vert Media Center Pics BBK Underdrive Pulleys \| K&N FIPK (Gen II) \| Bullet Grille \| Mach 1 Chin Spoiler \| UPR Interior Parts \| XM Radio \| Audiobahn Subs Ricer Hater's Club Member #1/2 (30) http://www.ricehatersclub.com/

03-14-2003, 01:52 AM	#5 (permalink)
jj_jonathon Trisket Join Date: May 2002 Location: University of Florida, FL Posts: ½ Posts: 1,561	i dont know stallion kits...but xenon is rear exhaust and the V6 rear has a cutout on the drivers side for the single tail pipe, even though its bent down... __________________ University of Florida - Physics Major My 02GT vert Media Center Pics BBK Underdrive Pulleys \| K&N FIPK (Gen II) \| Bullet Grille \| Mach 1 Chin Spoiler \| UPR Interior Parts \| XM Radio \| Audiobahn Subs Ricer Hater's Club Member #1/2 (30) http://www.ricehatersclub.com/

03-14-2003, 01:59 AM	#6 (permalink)
jj_jonathon Trisket Join Date: May 2002 Location: University of Florida, FL Posts: ½ Posts: 1,561	sorry...i just searched around and the V6 bumper should work...it appears to have no cutouts... they msrp for ~$325 but im sure you could find one cheaper...maybe a flawless one at a wrecker if youre lucky, or just order one from ford or online somewhere... __________________ University of Florida - Physics Major My 02GT vert Media Center Pics BBK Underdrive Pulleys \| K&N FIPK (Gen II) \| Bullet Grille \| Mach 1 Chin Spoiler \| UPR Interior Parts \| XM Radio \| Audiobahn Subs Ricer Hater's Club Member #1/2 (30) http://www.ricehatersclub.com/

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

03-13-2003, 08:21 AM	#3 (permalink)
adamstang2001 Registered Member Join Date: Mar 2003 Location: claxton, ga Posts: 1	You could try to use a kit from Stallion or Xenon. I believe that both of those kits use the side exit exhaust.

03-13-2003, 10:03 PM	#4 (permalink)
sjlawr vlgeideyot Join Date: Feb 2002 Location: Panama City, Fl Posts: 55	Maybe you could try ordering one that goes on the V6 mustang, i think they are the same, but do not have cut outs.

03-14-2003, 01:25 PM	#7 (permalink)
azyd Registered Member Join Date: Mar 2003 Location: clifton, nj Posts: 2	thanx guys i looked at all the bumpers and the all look good all i have to to do now is make a choice....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
aaaahhh.....how the heck do i get the rear bumper/ cover off?	webslinger	Appearance & Detailing	1	10-26-2004 10:48 PM
GT rear bumper cover brackets	stangdryvr89	Appearance & Detailing	3	06-24-2003 10:44 PM
cobra rear bumper cover	kenneth kimble	Windsor Power	3	05-18-2002 02:16 PM
Rear Bumper Inserts removal	Rog5.0	Windsor Power	1	12-25-2001 01:21 PM
GT to LX 5.0 rear bumper swap	93GTDIN	Windsor Power	2	03-20-2001 10:23 PM

Sponsored Links