MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   She runs my motor runs!!!! (http://forums.mustangworks.com/showthread.php?t=5007)

92Rustang 08-06-2001 08:11 PM

She runs my motor runs!!!!
 
I finally got my motor running this weekend. It sounds great!I'm going to put some miles on her tomorrow and see how she runs (floored) . I just wanted to thank you guys for your help over the past couple of weeks and say without this board I would be lost. Thanks you.

I'm thinking she should run low 13's with a hopeful high 12. What do you think?

Windsor Jr
1.73 Rockers
E-303
Cobra intake
65 TB
75mm Mas
3.73
5spd

Thanks again for the help.


------------------
Check my site for mod
www.fordmustanggt.com

Rick 91GT 08-06-2001 10:40 PM

Glad to see you got it running, get some miles on it and let the rings seat then romp on it and get some track numbers.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP

TJR 08-06-2001 10:46 PM

Congratulations, sounds like a good combo. Now you need to get it to the track and see what it will run. I think it should hit 12s with traction.

------------------
1989 lx notch
89,000 miles
bolt-ons,stock heads/cam
60'- 2.07, 8.90@78, 13.93@99

92Rustang 08-07-2001 12:59 AM

Thanks guys, I do have a question. I also upgraded the fuel system. What should I set my FP at w/24's and 155lph. I think I remember reading here somewhere around 26psi?


------------------
Check my site for mod
www.fordmustanggt.com

Rick 91GT 08-07-2001 03:02 PM

Quote:

Originally posted by 92Rustang:
Thanks guys, I do have a question. I also upgraded the fuel system. What should I set my FP at w/24's and 155lph. I think I remember reading here somewhere around 26psi?



http://www.mustangworks.com/msgboard/eek.gif NO, 26psi will be way too lean it may blow the motor You need to set it to 38-40psi with vaccum off.



------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP


All times are GMT -5. The time now is 01:01 PM.