Sheetmetal Vendor

jimberg · 04-06-2005, 03:47 PM

I'm looking for a good source to buy some body panels for my Mustang. I've already found www.rustrepair.com for quarter panels and fendors. I'm looking for a new door shell or at least a new door skin and I haven't had any luck. I also don't want to pay an arm and a leg for the parts.

Thanks.

Fat0eknee · 04-06-2005, 03:53 PM

theres a local guy around here that sells them ..www.johnsmustang.com
bunch of sites around
dallasmustang.com
npdlink.com

well the door shell at least you can find at these ..dont know about patch panels

jimberg · 04-06-2005, 04:08 PM

They have early Mustang door parts. I can't find any for any 89 Mustang GT Convertible.

Fat0eknee · 04-06-2005, 05:06 PM

man im sorry for some reason i was thinking you had a '65 ..i must have been reading another post and got them mixed up

Orange97GTVert · 04-06-2005, 09:36 PM

Try www.50resto.com.

baddogbo · 04-07-2005, 08:03 PM

You should be able to find a decent used door, Might be easier than installing a new skin if you can find one.

dresserman · 06-17-2005, 10:30 AM

Try this site. www.yearone.com Good hunting.

04-06-2005, 03:47 PM	#1
jimberg Registered Member Join Date: Oct 1998 Location: Rogers, MN Posts: 2,089	Sheetmetal Vendor I'm looking for a good source to buy some body panels for my Mustang. I've already found www.rustrepair.com for quarter panels and fendors. I'm looking for a new door shell or at least a new door skin and I haven't had any luck. I also don't want to pay an arm and a leg for the parts. Thanks. __________________ 351W 89 Mustang GT Convertible

04-06-2005, 03:53 PM	#2
Fat0eknee I'm slow ...I know. Join Date: Dec 2003 Location: houston Posts: 518	Re: Sheetmetal Vendor theres a local guy around here that sells them ..www.johnsmustang.com bunch of sites around dallasmustang.com npdlink.com well the door shell at least you can find at these ..dont know about patch panels

04-06-2005, 04:08 PM	#3
jimberg Registered Member Join Date: Oct 1998 Location: Rogers, MN Posts: 2,089	Re: Sheetmetal Vendor They have early Mustang door parts. I can't find any for any 89 Mustang GT Convertible. __________________ 351W 89 Mustang GT Convertible

04-06-2005, 05:06 PM	#4
Fat0eknee I'm slow ...I know. Join Date: Dec 2003 Location: houston Posts: 518	Re: Sheetmetal Vendor man im sorry for some reason i was thinking you had a '65 ..i must have been reading another post and got them mixed up

04-06-2005, 09:36 PM	#5
Orange97GTVert Mustang Fanatic Join Date: Dec 2003 Location: Tyler, TX Posts: 568	Re: Sheetmetal Vendor Try www.50resto.com. __________________ Harold Phillips www.mustangsofeasttexas.org 1997 Mustang GT Convertible, 4.6L Auto, Autumn Orange w/Saddle Tan Top & Leather Interior, Styling Bar, 17 X 9 Polished Cobra R's on Nitto NT 555's, Ford Racing Bullitt Suspension package, Mac CAI, Steeda UDP's, Flowmaster 40 Series Catback, SCT X-Calibrator II, Zaino Shine, 7 time Show Winner, driven daily

04-07-2005, 08:03 PM	#6
baddogbo Registered Member Join Date: Nov 2003 Location: Ma Posts: 10	Re: Sheetmetal Vendor You should be able to find a decent used door, Might be easier than installing a new skin if you can find one.

06-17-2005, 10:30 AM	#7
dresserman Registered Member Join Date: Jun 2005 Posts: 2	Re: Sheetmetal Vendor Try this site. www.yearone.com Good hunting.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sheetmetal Intake	MJ86GT	Windsor Power	2	07-11-2003 11:57 AM
68 Mustang sheetmetal	daleford	Classic Mustangs	3	08-10-1999 09:52 AM