1/4 window fix

five0guy · 05-17-2005, 10:13 PM

my 1/4 windows on my 89 are flaky and stuff and i was told i could fix it myself and make it look pretty good. is it possible, and if so how?. but if not, where can i find a new set? thanks.

OnMy3rdStang · 07-14-2005, 02:56 PM

1/4 windows are expensive to replace. WHat part is flaky? The molding? If so you can get replacement molding from Cal-mustang and 50resto i think.

4barrel · 08-25-2005, 07:12 PM

Is that a molding replacement, or a molding cover?

DemonGT · 10-03-2005, 09:02 AM

iv only seen molding covers...last i knew the moldings will not seperate from the windows....5.0resto and late model restoration sell repo quarter windows for 350 a pair..but they wont say "mustang" on them

you can remove the quarter windows and sand the molding smooth and tape the window off and paint the molding with black molding paint that can be had at more autozones ect..

HoodStrype · 10-12-2005, 12:22 PM

Sweet- I had the same problem- all I've found are covers as well. Sanding won't hurt the molding?

05-17-2005, 10:13 PM	#1
five0guy work in progress Join Date: Aug 2003 Location: The Mountains Posts: 28	1/4 window fix my 1/4 windows on my 89 are flaky and stuff and i was told i could fix it myself and make it look pretty good. is it possible, and if so how?. but if not, where can i find a new set? thanks.

07-14-2005, 02:56 PM	#2
OnMy3rdStang Registered Member Join Date: Nov 2001 Location: St. Louis, MO Posts: 644	Re: 1/4 window fix 1/4 windows are expensive to replace. WHat part is flaky? The molding? If so you can get replacement molding from Cal-mustang and 50resto i think. __________________ Danica Patrick is my homegirl

08-25-2005, 07:12 PM	#3
4barrel Mustang Rookie Join Date: Apr 2005 Location: Lexington Kentucky Posts: 98	Re: 1/4 window fix Is that a molding replacement, or a molding cover? __________________ 1989 Mustang GT aka Hailey http://www.cardomain.com/ride/822269

10-03-2005, 09:02 AM	#4
DemonGT Registered Member Join Date: Aug 2000 Location: Wisconsin Posts: 879	Re: 1/4 window fix iv only seen molding covers...last i knew the moldings will not seperate from the windows....5.0resto and late model restoration sell repo quarter windows for 350 a pair..but they wont say "mustang" on them you can remove the quarter windows and sand the molding smooth and tape the window off and paint the molding with black molding paint that can be had at more autozones ect.. __________________ '91 GT,410W,10.5 to 1 comp,Victor Jr. heads,Victor 5.8 intake,FTI cam,Crane retro fit lifters,Scorpian 1.6 RR's,Melling HV oil pump,MSD distro.,Canton oil pan,FMS flywheel,Romac balancer,FMS timing chain,Accufab 90mm TB,C&L 76mm maf, 42lbers,HD clutch,K&N air filter,Mac long tubes,Pro dumps,powerchamber,FMS 9mm wires,180 thermostat,Ford Racing gauges,5inch Tach,centerline convo pro's,nitto DR's,Pro3i lower control arms,50/50 shocks,3.55 gears,TFS HD diff. cover Next year: Tremec TKO,Spec stage 3 clutch,alum driveshaft,complete fuel system www.angelfire.com/linux/demondan

10-12-2005, 12:22 PM	#5
HoodStrype Rearview Mirror Haze Join Date: May 1999 Location: Huntsville, Alabama...a.k.a. "HuntsVegas" Posts: 387	Re: 1/4 window fix Sweet- I had the same problem- all I've found are covers as well. Sanding won't hurt the molding? __________________ 93 lx Notch 01 GT ...the epitome of Murphy's Law

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1965 window problem	jnrichardson25	Classic Mustangs	5	02-22-2005 09:13 PM
Window switch and WOT switch	bobtodd	Power Adders	2	02-17-2004 02:45 AM
Window regulator?	MouseOnJuice	Classic Mustangs	1	01-19-2004 07:43 PM
Clip That Holds Window Glass	Mustang_GT_90	Windsor Power	0	09-14-2003 02:05 AM
window wont go up all the way!	GhettoPop	Windsor Power	1	05-16-2003 06:14 AM