Anyone running the Roush 180's from World?

chris91LX · 12-29-2001, 06:19 PM

I was going to go with the AFR's, but for the same price I can get the Roush 180's and an intake. I guess my question is can I run in the 12's with the Roush 180's, Performer intake and the stock cam with the mods already in my sig? How much room to grow would I have with the Roush heads compared to a good Aluminum head like the AFR's?

Dragpack · 12-29-2001, 07:01 PM

I'm having Tony Feil build me a stroker 302 motor based on the Roush 200 heads. I worked out the plans for the motor with Tony Feil's staff and the Roush Heads look like a good unit. The motor should run 12 flat and high 11's at best. Thats what it is being built for. I saw the heads a week ago wow are they nice. Can't wait to see how the car runs

1BAD89 · 12-30-2001, 03:05 AM

Quote:

I guess my question is can I run in the 12's with the Roush 180's, Performer intake and the stock cam with the mods already in my sig?

Thumbs down on the performer.

Stang Runner · 12-30-2001, 09:50 AM

The AFR 165 Blow away the Roush 180 heads....But the Roush 200 heads are Very close to the AFR 165... As for the Intake I have heard the RPM is a better one. or get a Holley The Best out there right now I think.

1BAD89 · 12-30-2001, 01:55 PM

Quote:

Roush 180's

I don't think hardly anyone has experience with them, since they are so new, but that+holley intake,+the other basic things, you should be mid 12's easy.

12-29-2001, 06:19 PM	#1
chris91LX Registered Member Join Date: Oct 1998 Location: Suburban Chicago, Hanover Park Posts: 695	Anyone running the Roush 180's from World? I was going to go with the AFR's, but for the same price I can get the Roush 180's and an intake. I guess my question is can I run in the 12's with the Roush 180's, Performer intake and the stock cam with the mods already in my sig? How much room to grow would I have with the Roush heads compared to a good Aluminum head like the AFR's? __________________ My Ford Club http://www.midwestfords.org/ Best time N/A 12.9 @ 107 1.711 60' 125 shot - 12.04 @ 113 1.59 60'

12-29-2001, 07:01 PM	#2
Dragpack Registered Member Join Date: Oct 2001 Location: Bridgewater NJ USA Posts: 29	Roush 200 I'm having Tony Feil build me a stroker 302 motor based on the Roush 200 heads. I worked out the plans for the motor with Tony Feil's staff and the Roush Heads look like a good unit. The motor should run 12 flat and high 11's at best. Thats what it is being built for. I saw the heads a week ago wow are they nice. Can't wait to see how the car runs

12-30-2001, 09:50 AM	#4
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	The AFR 165 Blow away the Roush 180 heads....But the Roush 200 heads are Very close to the AFR 165... As for the Intake I have heard the RPM is a better one. or get a Holley The Best out there right now I think. __________________ Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SEMA Roush ------------- WOW!!!!!	SMOKE	Special Production	5	05-01-2009 05:07 AM
world products roush iron heads	canukracer	Windsor Power	5	08-30-2003 02:14 PM
New World Roush 200 Heads	89FHPLX	Windsor Power	3	07-04-2002 06:14 PM
Is anyone running the Roush 200/World heads?	Joe50	Windsor Power	2	06-27-2002 08:42 PM
1996 Cobra vs 2002 Stage 2 Roush	Milktasd	Stang Stories	4	03-22-2002 12:31 AM