Need advice on lowering ASAP!

BlackStang66 · 03-31-2002, 08:51 PM

I am about to lower my 1999 mustang. I was going to buy the Eibach pro-kit. I was wondering if this was the best kit to buy and what other options I had. Also, is there anything else i need to do when i lower it? I have heard that lowering it will cause some alignment problems? I would appreciate some help. Thanks

GodStang · 03-31-2002, 09:45 PM

Best kit? Probly not. Make sure you get new cambers and new shocks. Or you will have an alignement problem.

krayziejd · 04-26-2002, 10:23 PM

Get Eibach or H&R. You don't NEED new shocks/struts, but lowering your car with stock shocks/struts will definitely wear them out quicker. After you install your springs, wait about 2 weeks for them to settle, then get an alignment. With Eibach, no caster/camber plates needed.

SD_Stangette · 04-30-2002, 11:19 PM

What I did is get the Sprint Springs installed, put in some steeda caster/camber plates and I'm going to get an alignment tomorrow, no complaints here

03-31-2002, 08:51 PM	#1
BlackStang66 Registered Member Join Date: Jul 2001 Location: Newnan, Georgia Posts: 3	Need advice on lowering ASAP! I am about to lower my 1999 mustang. I was going to buy the Eibach pro-kit. I was wondering if this was the best kit to buy and what other options I had. Also, is there anything else i need to do when i lower it? I have heard that lowering it will cause some alignment problems? I would appreciate some help. Thanks

03-31-2002, 09:45 PM	#2
GodStang College Stanger Join Date: May 1999 Location: Aiken,south carolina, usa Posts: 1,097	Best kit? Probly not. Make sure you get new cambers and new shocks. Or you will have an alignement problem. __________________ 2003 Sonic Blue Cobra

04-30-2002, 11:19 PM	#4
SD_Stangette Registered Member Join Date: Apr 2002 Location: San Diego, CA Posts: 2	What I did is get the Sprint Springs installed, put in some steeda caster/camber plates and I'm going to get an alignment tomorrow, no complaints here __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
my friend needs advice!!! ASAP	jimdrechsler	Windsor Power	3	06-16-2004 07:09 AM
Advice on injectors...PKRWUD I'd like your advice on this one as well	silver_pilate	Windsor Power	3	06-09-2003 08:59 AM
Lowering my '96 - Springs?	ncbflo	Modular Madness	1	06-30-2001 09:27 AM
Please - I need advice on piston to valve clearance ASAP	2FastLX	Windsor Power	8	03-18-2001 03:05 PM

04-26-2002, 10:23 PM	#3
krayziejd Registered Member Join Date: Apr 2002 Location: So. Cal Posts: 5	Get Eibach or H&R. You don't NEED new shocks/struts, but lowering your car with stock shocks/struts will definitely wear them out quicker. After you install your springs, wait about 2 weeks for them to settle, then get an alignment. With Eibach, no caster/camber plates needed.