Older model Paxton

mrclean27_72 · 03-18-2005, 04:08 PM

Anyone know where I can buy a mounting bracket for an older model paxton supercharer? This is a picture from ebay of the model that I have .

exgmguy · 03-18-2005, 04:24 PM

Those ball drive Paxtons use the same brackets as a Powerdyne or a Vortech A/S/T/SC/B trims. You can find them pretty regularly on Ebay. The a re very expensive from the manufacturer but are pretty cheap on Ebay.
You are looking for the cast aluminum bracket that bolts to the passenger side cylinder head, and the flat machined aluminum bracket that attaches to the cast bracket and the blower bolts to that.

86saleen13 · 05-16-2005, 08:47 PM

Phone: 760.740.0954 http://www.paradisewheelsinc.com/

They are Paxton.

Ed

speedytang · 05-17-2005, 03:52 AM

The Ball Drive 'SN'-'VR4' bracket is different from the Powerdyne and all Vortech models. You can post on www.Superchargerhelp.com and probably get a hit or check Ebay I have seen then listed before. Talk to Craig at Paradise Wheels and maybe he will break apart a kit for you the brackets.

03-18-2005, 04:08 PM	#1
mrclean27_72 Registered Member Join Date: Mar 2005 Posts: 8	Older model Paxton Anyone know where I can buy a mounting bracket for an older model paxton supercharer? This is a picture from ebay of the model that I have .

03-18-2005, 04:24 PM	#2
exgmguy Registered Member Join Date: Feb 1999 Location: Utica, Michigan Posts: 2,631	Re: Older model Paxton Those ball drive Paxtons use the same brackets as a Powerdyne or a Vortech A/S/T/SC/B trims. You can find them pretty regularly on Ebay. The a re very expensive from the manufacturer but are pretty cheap on Ebay. You are looking for the cast aluminum bracket that bolts to the passenger side cylinder head, and the flat machined aluminum bracket that attaches to the cast bracket and the blower bolts to that. __________________ 1988 Mustang GT stock bottom 302, C4 10.9 @ 128 with 8 psi of Novi 1000 boost!----STOLEN 1989 Mustang notchback Warmed up 306 with a Procharger.

05-16-2005, 08:47 PM	#3
86saleen13 Registered Member Join Date: May 2005 Posts: 2	Re: Older model Paxton Phone: 760.740.0954 http://www.paradisewheelsinc.com/ They are Paxton. Ed

05-17-2005, 03:52 AM	#4
speedytang Registered Member Join Date: Oct 1999 Location: Marengo, Ohio.USA Posts: 135	Re: Older model Paxton The Ball Drive 'SN'-'VR4' bracket is different from the Powerdyne and all Vortech models. You can post on www.Superchargerhelp.com and probably get a hit or check Ebay I have seen then listed before. Talk to Craig at Paradise Wheels and maybe he will break apart a kit for you the brackets.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ever race an older muscle car and spank 'em?	88GT5.013.02	Stang Stories	39	07-18-2004 07:56 PM
swapping out a 5.0 for an older 5.8 in my truck	mean81GT	Built Ford Tough	4	01-18-2004 12:17 PM
Updated paxton novi 1000 kits	mike72678	Power Adders	1	03-27-2003 08:05 PM
Newer Mustang seats in an older model?	89 Cobra LX	Windsor Power	1	11-07-2001 04:55 PM
sn95 Cobra intake vs older sn93 Cobra intake	Fordman50	Windsor Power	2	03-17-2001 01:09 AM