Gasket #'s

Shotgun28 · 05-31-2001, 07:30 PM

Okay gang any help would be appreciated. I need gasket numbers and suggestions for these parts...

Thermostat housing gasket

Head gaskets

Intake gaskets

and a recommendation on a water pump (name brand) and why...

Thank you,

Kevin

P.S This is for the car in my sig...

------------------
91 LX Convertible Gray on Red B&M Shift improver kit,ASP red alum. underdrive pulleys, Richmond 3.73 gears, 1 5/8 Flowtech long tube Headers and off road h-pipe, Flowmaster 2-chamber cat-back with S.S exhaust, MSD 6A Ignition with coil,Cap and rotor, Taylor Pro wires, K&N 12" conical filter system, Jet stage 2 performance chip,GT40 P heads, looking at new exhaust, Lentech Street Terminator plus.

Rick 91GT · 06-01-2001, 12:39 PM

THERMO-Basic Thermo gasket from Auto Parts store has always worked fine for me, get the self adhesive one side though.

HEAD-Fel Pro (not sure of part number for stock heads) Gra[hite FMS or ROLS are also nice.

INTAKE-Fel Pro 1250, don't use the cor end seals always use a nice thick bead of RTV.

WATER PUMP- Stewart Componets, Hi-Flow un polished $69.00 polished $89.00

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

05-31-2001, 07:30 PM	#1
Shotgun28 Registered Member Join Date: Sep 2000 Location: New Hope MN USA Posts: 276	Gasket #'s Okay gang any help would be appreciated. I need gasket numbers and suggestions for these parts... Thermostat housing gasket Head gaskets Intake gaskets and a recommendation on a water pump (name brand) and why... Thank you, Kevin P.S This is for the car in my sig... ------------------ 91 LX Convertible Gray on Red B&M Shift improver kit,ASP red alum. underdrive pulleys, Richmond 3.73 gears, 1 5/8 Flowtech long tube Headers and off road h-pipe, Flowmaster 2-chamber cat-back with S.S exhaust, MSD 6A Ignition with coil,Cap and rotor, Taylor Pro wires, K&N 12" conical filter system, Jet stage 2 performance chip,GT40 P heads, looking at new exhaust, Lentech Street Terminator plus.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Timing Chain cover gasket change	Chris_H	Windsor Power	6	11-18-2004 08:03 AM
Gt40x heads gasket?	drtbiker	Windsor Power	6	05-14-2003 06:52 PM
2002 valve cover gasket?	ponypower	Modular Madness	1	07-26-2002 05:22 PM
Header Gasket Help Needed	Phillip Long	Windsor Power	5	05-03-2002 01:59 PM
gasket matching intake ports	matt cook	Windsor Power	3	12-07-2001 04:44 PM

06-01-2001, 12:39 PM	#2
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	THERMO-Basic Thermo gasket from Auto Parts store has always worked fine for me, get the self adhesive one side though. HEAD-Fel Pro (not sure of part number for stock heads) Gra[hite FMS or ROLS are also nice. INTAKE-Fel Pro 1250, don't use the cor end seals always use a nice thick bead of RTV. WATER PUMP- Stewart Componets, Hi-Flow un polished $69.00 polished $89.00 ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!