Nitrous cutting out
 

I have a '90GT with aftermarket heads/cam/intake. I went to my local drag strip on Fri. night. I recently installed a bottle warmer kit in hopes to get the most out of my nitrous system & finally get some consistent performance out of my NOS #5115 150 dry shot. Well the bottle warmer did help out. My car went quicker down the 1,320' for sure. The nitrous worked perfectly right off the launch, through 1st, 2nd & 3rd gear...but when I shifted into 4th it pretty much felt like the nitrous turned off. :eek: So I tried one more run on the juice only to find out that the nitrous wasn't even working this time. At first I thought the problem might be that the vacuum line had blown off the nitrous regulator, which would have made sense seeing how that vacuum line is what boosts the fuel pressure up to 85psi. to mix with the incoming nitrous oxide. No such luck. The vacuum line was secured and in place. I continued to look at all the vacuum lines in hopes to find one that had fallen off of the manifold or dried out & was cracking. But...everything looked fine. Then it dawned on me that it has been years since I've rebuilt my nitrous solenoids. Do you think this could be my problem? Oh, & I have plenty of fuel voume & pressure. I have a 155lph intank fuel pump and an MSD 200gph inline fuel pump. So it's not the fuel pressure safety switch shutting off the flow of nitrous due to inadequate fuel pressure.

Re: Nitrous cutting out
 

the solinoid makes sense, do you have a filter on the nitrous? Maby its clogged. how much bottle pressure are you spraying with?

Re: Nitrous cutting out
 

Yeah, I can't believe I didn't remember to check the nitrous filter while I was at the track. I'm going to check that out tonight for sure. Even if there is something in there...I think rebuilding the nitrous solenoids might be a good idea. How often do they need to be rebuilt? Is it a normal thing to need to rebuild them every 5 years of so? Actually it's probably been a good 7 years since I've rebuilt mine. I'm running 900psi. now that I have a bottle warmer. But, like I said before...it worked great through 1st, 2nd & 3rd gear. It just seems weird that I'm still having intermittent problems with this system I've had for years.

Re: Nitrous cutting out
 

i dont know about a rebuild schedule on those. It would be interesting to know if you are getting a black cloud with those cut outs, kinda indicating a rich condition, that would also indicate the nitrous cutting off or running low

Re: Nitrous cutting out
 

As far as I know there were no black clouds. I had quite a few friends watching the race when it cut out and no one mentioned seeing anything like that. From in the car it definitely felt like a rich condition was occuring. 1st, 2nd & 3rd gears were insane...sticking me back in the seat. I shift into 4th and the nitrous definitely had shut off. It felt REAL slow all of a sudden being back to just on motor, running 8 degrees of timing...with the rich condition, from the second I shifted into 4th, all the way to the finish line.

Re: Nitrous cutting out
 

well, id start with the things we've gone over so far and move on to other things if its still not solved. i'll bet its one of the things we mentioned already.

Re: Nitrous cutting out
 

Well I'm pretty sure I found the problem! My nitrous filter had a lot of debri in it. Looking through the screen...it's probably 80% clogged. The stuff clogging it looks kind of like teflon. I know not to use teflon tape on nitrous connections though. I've always used liquid teflon on all the fittings on my nitrous system. So how would chunks of teflon get embedded into the filter like that? Or is it possible that the nitrous that I just got filled into my bottle was somehow dirty?! So I'm cleaning the filter out & rebuilding my nitrous solenoids. I want to make sure none of this crap got past the filter and into the solenoids.

Re: Nitrous cutting out
 

those bottles corrode inside. keep an eye on your filter.

Re: Nitrous cutting out
 

Good to know. Thanks man. My bottle is only a year old...so hopefully it's ok inside. Soo...in your opinion should I still rebuild, or at least take apart the solenoids to make sure nothing has gotten in there? Or do you think the nitrous filter catches most of the debri? The screen doesn't seem like much of a filter to me. Looks like plenty of small particles could get through it.

Re: Nitrous cutting out
 

certainly inspect the solinoids. the filter should catch most anything that would peel off the inside of a bottle. never hurts to look, since you are gonna be there anyway.

hurry up and get it runnin and let me know if its fixed!!!

Re: Nitrous cutting out
 

Will do! I'm going to the lake this weekend so I might not get to it until next weekend. I should have everything fixed by then though, for sure. Thanks for your input 84gt347.

Re: Nitrous cutting out
 

anytime :)