MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Power Adders (http://forums.mustangworks.com/forumdisplay.php?f=28)
-   -   how much nitrous can it take?? (http://forums.mustangworks.com/showthread.php?t=49495)

goodyear1984 03-06-2007 05:15 AM

how much nitrous can it take??
 
hey how much nitrous have you guy ran safely with the stock fuel system...stock lowerend...92 5.0...nitrous works 175hp kit wet

Dark_5.0 04-02-2007 05:59 PM

Re: how much nitrous can it take??
 
Since you are running a wet kit, assuming your tune is very good, you can spray a 200 shot without blowing the motor.

Nitrous doesnt destroy motors. Nitrous + a lean condition destroys motors.

Almost every engine I have seen that died from a nitrous overdose had a hole burned in the piston from a lean condition or detonation.

If you have enough fuel and enough timing pulled out you can spray the hell out of a 5.0.

347strokerstang 04-02-2007 11:02 PM

Re: how much nitrous can it take??
 
stock bottom end tho, i wouldnt push it much over a 200 shot, if you want to spray more, you need to tighten up the bottom end. The pistons tho, will handle it no prob. provided u dont go lean, and you back the timing off enough, thats y so many ppl do spray the 5.0s they handle it with ease. Tony


(this is a link to an old vid. when i first got the stang and rebuilt it, umm...just a LIL over stock, all internals i was goin to keep the stock look but, then i reasond with my self and said **(k stock. lol


http://thumbs.vidiac.com/comment/aa3...f5591563bc.jpg

USMC302 04-10-2007 05:39 PM

Re: how much nitrous can it take??
 
The stock head gaskets won't hold past a 150. Get some good head gaskets.

goodyear1984 05-04-2007 11:30 PM

Re: how much nitrous can it take??
 
tuneing its not a prolbem ..not worried about runnig lean just how much befor the rods come out of the block for a vist..lol have any of u guys actually ran 200 shot if so what kit ....

goodyear1984 05-04-2007 11:37 PM

Re: how much nitrous can it take??
 
ps i havent even ran the kit yet cuz i had a intake back fire that was a pain in tha but to figure out ended up being one of the valve guides making the intake valves sticking..no way in hell was i gonna spray it with it poping out the intake


All times are GMT -5. The time now is 06:27 PM.