carbed twin turbo?
 

Ok ok i'm new to the v8 crowed, but i'm lookin into building a 86 stang 5.0 twin turbo. I'll be using two garrett t3's off the old t-bird turbo coupes. But i'm not sure how to hook the charge up to a carbeurator. I now how fuel injected guy doit causeyou can just run it to the throttlebody. But no clue to do it on a carb and not have any pressure leak. Anyone explain or have any pics of a turbo carb setup?

Go here.

http://www.toohighpsi.com/BudgetTT/BudgetTT.htm

Also check out www.turbomustangs.com. Don't know much about the carbed/turbo combinations, but we have a couple guys running them with some impressive numbers.

you need a blow thru carb and theres boxs that go around the carb to hold the pressure.

Also the turbo coupes didnt have T3's they had an IHI turbo. I have a freshly rebuilt IHI with no miles if u want it.

The difference is the IHI will spool a lot quicker but wont support as much HP as the T3. The T3 is good for about 320 and the IHI about 260. But an IHI will see boost as early as 1800rpm!

Skyler