MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Power Adders (http://forums.mustangworks.com/forumdisplay.php?f=28)
-   -   Looking to upgrade.. (http://forums.mustangworks.com/showthread.php?t=39425)

Sweet_25th 10-01-2003 10:40 AM

Looking to upgrade..
 
Im looking to upgrade, and am becoming a little excited about the thought of boost. Before I go any further, I should explain what I already have and then see what you people out there think would be best.

I have the trick flow track heat with 75mm BBK T/B, EGR spacer, and 75mm Pro-m MAF, 24# inj., underdrive pulleys, 9mm wires, 190lph, Aeromotive FPR, BBK 1 5/8 Long tubes, O/R H-pipe, flowmaster 2 chambers.

The rest of the engine is stock...heads, cam, pistons, etc. All with about 139K miles on them.

My question is this...I have about $3200 coming to me in Feb, and Im confused on if I should get some heads and a cam and possibly some new pistons with the money or should I get either a Supercharger or Turbokit first? Any thoughts or suggestions would be appreciated.

Simi Stang 10-01-2003 03:19 PM

HEADS!
 
I'd suggest heads & a cam to take advantage of that intake...& the 24lb. injectors...because at the point where you are now...you don't need anymore than the stock 19s. IMO supercharging or slapping a turbo on a 140K bottom end...is just asking to hurt something. The heads and cam should wake it up some without as much abuse on the internals.


All times are GMT -5. The time now is 08:50 PM.