Question about cam and supercharger
My question is will a compucam 2030 grind cam work well with an A-trim supercharger on a low compression (8.5 or 9 to 1) 306?
The specs of the cam are as follows:
* Advertised duration: 270 intake/278 exhaust
* Duration at .050 in.: 216 intake/220 exhaust
* Gross valve lift: .533 in. intake/.544 in. exhaust
* Lobe separation: 112 degrees
* RPM range: 2,000 to 5,500
TIA,
Dave
|