[giddyup306]

Hey all I'm new to MW. Anyways here's the 411 on this. I posted this same thread at AFM,SN,Corral, SCCOA, and SHOforum. But didn't get crap. So if you have any info please help me!!!


I can get a working SC blower real cheap like so I've concidered spraying less and going with the blower. I need to know if there is a company that makes lower intakes to match the SC (link too please). The short block I'm using will be a bone stock 86 f150 short block with the exception of ARP 2001 bolts and a SVO main suport system. The NA portion of the motor will make around 300 at the rear wheels (t5 trans). If I remember correctly the truck 5.o's have lower compression like 8.5:1 but I don't know if that's b/c of bigger combustion chambers or if it's in the pistons. I'll need some ideas on how to run the scock IC tubes from a SC as well. I'll be running Edel. perf. RPM heads with this to get some of the detonation.

I will also need to know what company makes custom lower intakes (link too please).

Also I will need some suggestions for a nirtous kit. I'm looking for a wet kit and to spray around 125 hp.

Any and all info will be appreciated!!!!!!!!!


Mike