Turbo on a 4.6

RiceHater · 03-23-2003, 12:35 AM

Hey im lookin for a good starting turbo kit, probably a single for use on a 4.6 L Mustang. I was wondering which brands have the best quality, power and reliability. The motor is all stock, is that a problem? If so what are some good mods to start with. Thanks

91GTturbo · 03-25-2003, 07:26 PM

I responded to a turbo request over in the modular forum a while back, try a search and see what you find. I'm not much into the modular kits, I had to do some research then to supply that person with some kit manufactures.

Keep the boost low on pump gas with a good tune and reliability will not be a problem. I had my kit on for a long time and the motor was completely stock. A little to greedy with the boost one day and it blew a headgasket, other than that, no problems.

Check out www.turbomustangs.com for more information.

Stang Runner · 04-01-2003, 07:39 PM

I dont know if he has a single turbo kit but he has nice TT ones... Induction Concepts

03-23-2003, 12:35 AM	#1
RiceHater Registered Member Join Date: Mar 2003 Posts: 8	Turbo on a 4.6 Hey im lookin for a good starting turbo kit, probably a single for use on a 4.6 L Mustang. I was wondering which brands have the best quality, power and reliability. The motor is all stock, is that a problem? If so what are some good mods to start with. Thanks

03-25-2003, 07:26 PM	#2
91GTturbo Registered Member Join Date: May 2001 Location: Valdese, NC Posts: 361	I responded to a turbo request over in the modular forum a while back, try a search and see what you find. I'm not much into the modular kits, I had to do some research then to supply that person with some kit manufactures. Keep the boost low on pump gas with a good tune and reliability will not be a problem. I had my kit on for a long time and the motor was completely stock. A little to greedy with the boost one day and it blew a headgasket, other than that, no problems. Check out www.turbomustangs.com for more information. __________________ 91 single turbo vert

04-01-2003, 07:39 PM	#3
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	I dont know if he has a single turbo kit but he has nice TT ones... Induction Concepts __________________ Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo vs SC Sounds like good advice	mustardjohn	Small Ponies	0	11-16-2003 05:21 PM
Ran a turbo Integra, a Grand National, and two bikes!!!	WhiteT78Supra	Stang Stories	23	07-19-2002 07:21 AM
Turbo in n/a 2.3?	pxcr_600	Small Ponies	1	06-21-2002 12:20 PM
What's needed to build a Turbo 5.0L?	Gautam	Windsor Power	1	06-07-2001 05:34 PM
How do I know if the turbo is working?	Trevor	Small Ponies	3	07-20-1999 10:35 PM