MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Power Adders
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 11-02-2010, 05:15 AM   #1
2000stang5.00
Registered Member
 
Join Date: Nov 2010
Posts: 1
Default Procharger Stang...

Hello,
Background... i have a 2000 Mustang. It was a V6 auto. I acquired an 88 Cougar NonHO 5.0, AOD with 60K, so I swapped the V6 drivetrain for the 5.0 Cougar drivetrain, dual exhaust, harness, speed density, 50mm TB, 14LB/HR injectors, exhaust manifolds, etc. All is running great. Mid 20's MPG I found out that this nonHO 88 Cougar 5.0 is only rated at 155HP with the dual Y-pipe.
Now comes the procharger part... A few years ago I picked up a factory refurbished Nissan 350Z. Supposedly, it was putting out 500HP before it blew the bottom end out of the Nissan. No damage was done to the Procharger but the guy sent it in for a checkup to make sure. Procharger made it look like new. I havent seen the Procharger since I bought it so I cant tell you the model right now. I will have to find it. (I found the procharger. Its a C-2)
What I am think of doing is leaving the stock horsepowerchallenged long block alone and just do the bolt on stuff. Leaving the 155HP Cougar swirl port heads, cam, nonforged pistons, etc.
Im upgrading to the HO upper intake, 60mm TB, 19mm injectors, and Speed Density EEC-IV DA1.
I was thinking of adding the procharger with a lower boost pulley and see what happens. What do you guys think? Is it worth it?

Last edited by 2000stang5.00; 11-03-2010 at 04:13 AM.. Reason: found the procharger.
2000stang5.00 is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ati procharger etnovass Power Adders 1 02-06-2006 08:45 AM
5 psi Procharger on a 99 v6 99silver6 Power Adders 3 04-23-2003 02:29 PM
Procharger Help dmorley12 Windsor Power 1 02-13-2002 10:57 AM
99+ GT procharger 300hp99GT Modular Madness 0 09-19-2001 12:50 AM
ATI ProCharger KWhite Modular Madness 7 06-07-2001 09:16 AM


All times are GMT -5. The time now is 03:13 PM.


SEARCH