PAXTON SN93/ANY GOOD

joey50gt · 07-10-2001, 02:31 PM

is the paxton sn93 blower any good? i have a chance to pick up one that is hardly used.
when was it discontinued?was there any big problems with it? how much boost does it puch stock? can you put a smaller pully?

07-10-2001, 03:48 PM

If it's hardly used, cheap & you know the owner fairly well it may be a good purchase.

As long as it has been taken care of,(ie the oil's been changed regularly & not overspun) then it should be a good blower.

With the original pulley, it will put out around 6 psi of boost. You can get smaller pulleys for them and/or a modified impeller (with curved blades) to get 10 psi out of it. (the regular impeller has straight blades)

Another good option is an oil cooler. It basically circulates the oil inside the blower thru an oil cooler, prolonging the life of the blower (especially for a car that sees alot of street driving).

If you need parts/service/advice on the ball drive Paxtons, try contacting Mike at Blown Away Blower Service (BABS) at boost@webtv.net

------------------
91 coupe
3.73's,long tubes,2 1/2" exh,ported stock t-body,ProM-77mm
cobra intake,edelbrock heads,B303,1.72 rr's
36lb inj's,tremec, & a Paxton NOVI 2000!!!
11.020 @128.95 on BFG Drag Radials (275/60/15)

07-11-2001, 11:15 AM

Make that email address BOOST@webtv.net

07-11-2001, 05:41 PM

Sorry, neither of those email addresses are working. I will let you know when I find out how to get a hold of him if you need to.

joey50gt · 07-13-2001, 06:07 PM

07-10-2001, 02:31 PM	#1
joey50gt Registered Member Join Date: Jan 2001 Location: hurst,texas,america Posts: 95	PAXTON SN93/ANY GOOD is the paxton sn93 blower any good? i have a chance to pick up one that is hardly used. when was it discontinued?was there any big problems with it? how much boost does it puch stock? can you put a smaller pully?

07-13-2001, 06:07 PM	#5
joey50gt Registered Member Join Date: Jan 2001 Location: hurst,texas,america Posts: 95	ttt

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Good Car Movies?	1969Mach1	Blue Oval Lounge	22	05-21-2002 08:56 AM
351W headache or good idea?	5.0PiMpin	Windsor Power	7	04-17-2002 10:01 AM
Competition Engineering(Moroso) anti-sway bar opinion/pics....not good!	8850	Windsor Power	10	11-08-2001 11:47 AM
Good race with a new V6 stang...	Skyman	Stang Stories	6	01-01-2001 06:06 PM

07-10-2001, 03:48 PM	#2
SisuStang Guest Posts: n/a	If it's hardly used, cheap & you know the owner fairly well it may be a good purchase. As long as it has been taken care of,(ie the oil's been changed regularly & not overspun) then it should be a good blower. With the original pulley, it will put out around 6 psi of boost. You can get smaller pulleys for them and/or a modified impeller (with curved blades) to get 10 psi out of it. (the regular impeller has straight blades) Another good option is an oil cooler. It basically circulates the oil inside the blower thru an oil cooler, prolonging the life of the blower (especially for a car that sees alot of street driving). If you need parts/service/advice on the ball drive Paxtons, try contacting Mike at Blown Away Blower Service (BABS) at boost@webtv.net ------------------ 91 coupe 3.73's,long tubes,2 1/2" exh,ported stock t-body,ProM-77mm cobra intake,edelbrock heads,B303,1.72 rr's 36lb inj's,tremec, & a Paxton NOVI 2000!!! 11.020 @128.95 on BFG Drag Radials (275/60/15)

07-11-2001, 11:15 AM	#3
SisuStang Guest Posts: n/a	Make that email address BOOST@webtv.net

07-11-2001, 05:41 PM	#4
SisuStang Guest Posts: n/a	Sorry, neither of those email addresses are working. I will let you know when I find out how to get a hold of him if you need to.