MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Power Adders
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 03-06-2007, 05:15 AM   #1
goodyear1984
Registered Member
 
Join Date: Dec 2006
Location: new york
Posts: 482
Default how much nitrous can it take??

hey how much nitrous have you guy ran safely with the stock fuel system...stock lowerend...92 5.0...nitrous works 175hp kit wet
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters
^best et so far 11.6 1.61 60ft coming soon 9sec et's
1992 mustang gt
2001 gmc 1500 4x4
78 century boat
92 skidoo
goodyear1984 is offline   Reply With Quote
Old 04-02-2007, 05:59 PM   #2
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default Re: how much nitrous can it take??

Since you are running a wet kit, assuming your tune is very good, you can spray a 200 shot without blowing the motor.

Nitrous doesnt destroy motors. Nitrous + a lean condition destroys motors.

Almost every engine I have seen that died from a nitrous overdose had a hole burned in the piston from a lean condition or detonation.

If you have enough fuel and enough timing pulled out you can spray the hell out of a 5.0.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 04-02-2007, 11:02 PM   #3
347strokerstang
Registered Member
 
347strokerstang's Avatar
 
Join Date: Dec 2006
Posts: 8
Smile Re: how much nitrous can it take??

stock bottom end tho, i wouldnt push it much over a 200 shot, if you want to spray more, you need to tighten up the bottom end. The pistons tho, will handle it no prob. provided u dont go lean, and you back the timing off enough, thats y so many ppl do spray the 5.0s they handle it with ease. Tony


(this is a link to an old vid. when i first got the stang and rebuilt it, umm...just a LIL over stock, all internals i was goin to keep the stock look but, then i reasond with my self and said **(k stock. lol


__________________
92 5.0L Mustang LX HB
Accel 300+ Digital Ignition,Accel 300+ 8.8mm wires, Accel Super Coil,FRPP E303 cam,C4 with TCI clutchs,steels,servos,input shaft,
manual VB,Street fighter 3000stall w/SFI bell,MAC X pipe w/Flowmaster 40s,ported stock heads upper and lower intake.FRPP roller lifters,pushrods. Pete Jackson gear drive. KB forged FTs.Custom interior.B&M console shifter.tucked engine compartment wires
347strokerstang is offline   Reply With Quote
Old 04-10-2007, 05:39 PM   #4
USMC302
Registered Member
 
USMC302's Avatar
 
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
Default Re: how much nitrous can it take??

The stock head gaskets won't hold past a 150. Get some good head gaskets.
__________________
USMC302 is offline   Reply With Quote
Old 05-04-2007, 11:30 PM   #5
goodyear1984
Registered Member
 
Join Date: Dec 2006
Location: new york
Posts: 482
Default Re: how much nitrous can it take??

tuneing its not a prolbem ..not worried about runnig lean just how much befor the rods come out of the block for a vist..lol have any of u guys actually ran 200 shot if so what kit ....
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters
^best et so far 11.6 1.61 60ft coming soon 9sec et's
1992 mustang gt
2001 gmc 1500 4x4
78 century boat
92 skidoo
goodyear1984 is offline   Reply With Quote
Old 05-04-2007, 11:37 PM   #6
goodyear1984
Registered Member
 
Join Date: Dec 2006
Location: new york
Posts: 482
Default Re: how much nitrous can it take??

ps i havent even ran the kit yet cuz i had a intake back fire that was a pain in tha but to figure out ended up being one of the valve guides making the intake valves sticking..no way in hell was i gonna spray it with it poping out the intake
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters
^best et so far 11.6 1.61 60ft coming soon 9sec et's
1992 mustang gt
2001 gmc 1500 4x4
78 century boat
92 skidoo
goodyear1984 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
which nitrous kit Fat0eknee Modular Madness 1 12-22-2005 10:10 AM
Nitrous on my 5.0 LayanRubr Windsor Power 4 03-30-2004 01:34 AM
A few Nitrous ? Fostang Windsor Power 2 10-15-2001 10:37 PM
I want nitrous! bark3rd Modular Madness 23 08-02-2001 04:47 AM
Nitrous dinomite Stang Stories 1 02-13-2001 10:26 AM


All times are GMT -5. The time now is 11:45 AM.


SEARCH