© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
08-16-2004, 08:27 AM | #1 |
Registered Member
Join Date: Apr 2001
Posts: 167
|
part #??? or SIZE??
looking for part # for nitrous
I have the stage I system from NOS (dry). i have a 75 horsepower shot jet in there. Does anyone know the part number for the 125 HP jet? I want to change only the jet that leads to the TB. Thank you. OR THE SIZE OF THE JET FOR THE 125 shot. Jim
__________________
OLD CAR-89 lx convt- Flowtech II headers, H-pipe, 2 1/2 "flowmasters- pulleys- 3.73's, ripper shifter- ram air- Best 1/4 mile time- a measley 14.2 at 98.6 PRESENT CAR- 90 LX BBK long tubes, h-pipe with cats, flowmasters. 3.55's holley systemax II kit- 70 mm TB 30#injectors, jacobs ignition, black magic fan, 180 thermostat, 75 shot of NOS- NITTO DR'S STREET TIRE BEST RUNS 1/4 mile13.2 @112 w/ NOS 2.17 60' 13.5 @103 2.1 60' *new time with Dr's 12.8 at 111 w/ 75 shot |
08-16-2004, 01:05 PM | #2 |
I'm slow ...I know.
Join Date: Dec 2003
Location: houston
Posts: 518
|
|
08-16-2004, 05:59 PM | #3 |
Registered Member
Join Date: Apr 2001
Posts: 167
|
thanks. i have the stage I 5115 from NOS. any idea how to get ahold of just one of these jets? for 125 shot? thanks,
jim
__________________
OLD CAR-89 lx convt- Flowtech II headers, H-pipe, 2 1/2 "flowmasters- pulleys- 3.73's, ripper shifter- ram air- Best 1/4 mile time- a measley 14.2 at 98.6 PRESENT CAR- 90 LX BBK long tubes, h-pipe with cats, flowmasters. 3.55's holley systemax II kit- 70 mm TB 30#injectors, jacobs ignition, black magic fan, 180 thermostat, 75 shot of NOS- NITTO DR'S STREET TIRE BEST RUNS 1/4 mile13.2 @112 w/ NOS 2.17 60' 13.5 @103 2.1 60' *new time with Dr's 12.8 at 111 w/ 75 shot |
08-16-2004, 08:06 PM | #4 |
I'm slow ...I know.
Join Date: Dec 2003
Location: houston
Posts: 518
|
summitracing.com sells them for $7.40/a piece a lot of local places carry jets as well so you could probably just go to performance shop thats in ur area
|
08-16-2004, 09:41 PM | #5 |
Registered Member
Join Date: Apr 2001
Posts: 167
|
well, i caled them and he said with the stage one kit i would have to really jump to the stage II kit.
BUT all i want to do is get a bigger jet (125 hp) and replace it with my stage one system. I saw a guy at the trck do this and it ran fine. his fuel pump was even stock, and mine is a 155lph. he also did not know the size that would equate to a 125 shot caus ethey sell them in measurements of 1/1000 of an inch. CAn this be done??? he metnioned something about he solenoids only being able to shoot 75 hp anyway. he also said if i take the jet out, it wouldnt matter cause the maiximum amount is already being shot in there! any thoughts?
__________________
OLD CAR-89 lx convt- Flowtech II headers, H-pipe, 2 1/2 "flowmasters- pulleys- 3.73's, ripper shifter- ram air- Best 1/4 mile time- a measley 14.2 at 98.6 PRESENT CAR- 90 LX BBK long tubes, h-pipe with cats, flowmasters. 3.55's holley systemax II kit- 70 mm TB 30#injectors, jacobs ignition, black magic fan, 180 thermostat, 75 shot of NOS- NITTO DR'S STREET TIRE BEST RUNS 1/4 mile13.2 @112 w/ NOS 2.17 60' 13.5 @103 2.1 60' *new time with Dr's 12.8 at 111 w/ 75 shot |
08-16-2004, 09:54 PM | #6 |
I'm slow ...I know.
Join Date: Dec 2003
Location: houston
Posts: 518
|
well if thats true about the solenoids you can always buy bigger ones instead of buying a whole "stage II" kit
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TFI module part # | GhettoPop | Windsor Power | 2 | 02-12-2004 01:34 PM |
wheel size | fordkid68 | Stang Stories | 0 | 03-13-2002 07:14 PM |
wheel size | fordkid68 | Classic Mustangs | 0 | 03-10-2002 03:28 PM |
What Size For Custom Wheels | Mo65 | Classic Mustangs | 6 | 03-05-2000 12:13 AM |
Hard to locate part for 83 stang help!!! | 83stanger | Small Ponies | 0 | 03-02-1999 08:52 AM |