MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 10-15-2001, 07:47 PM   #1
Fostang
Registered Member
 
Join Date: Feb 2001
Location: Stockton, Ca
Posts: 599
Post A few Nitrous ?

I'm thinking about going back using my edelbrock nitrous kit in the fastback. Only thing is that I've changed my fuel pump and my ignitions set up. Now I have a new distriburator with the petronix electronic ignition and a modern wide rotor and cap (the type found on 86-93 5.0's) 8.8 Accel wires the stock temp spark plugs and the stock mechanical fuel pump. I wanted to make the set up simpler so thats why I did it like this. I am probably going to set my timing at 10-12 its at 14 right now, one heat range colder plug, and a carter high volume fuel pump. My question is do I need to buy an MSD 6AL ignition box for the set up. I'm only going to be running 75-100 shot. I know this is long but I just want to make sure I get it right this time. Thank you in advance.

------------------
67' Fastback-Mean Temper
67' Coupe Under Construction
70' Torino Cruiser
84' Svo Original
Fostang is offline   Reply With Quote
Old 10-15-2001, 10:18 PM   #2
Five0
Registered Member
 
Five0's Avatar
 
Join Date: Apr 2000
Location: middleburg, fl, usa
Posts: 1,134
Post

You should be fine with or without the msd but it is not a bad idea. I would go with a digital 6+ because it can take timing out when you use the nitrous and if you decide to go with a bigger shot than 70 to 100 it will be a real good idea and will even add a little more safety to a 75 shot. Either way as long as you have a good coil and a colder set of plugs you should be fine.

------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
Five0 is offline   Reply With Quote
Old 10-15-2001, 10:37 PM   #3
Fostang
Registered Member
 
Join Date: Feb 2001
Location: Stockton, Ca
Posts: 599
Post

I was also looking at the digital 7 but for $530 thats one big hit out of the pocket book. As for a coil I have the petronix flame thrower 40k epoxy filled. Any more recomendation before I jump into my search of 12's will be greatly appreciated.

------------------
67' Fastback-Mean Temper
67' Coupe Under Construction
70' Torino Cruiser
84' Svo Original
Fostang is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
nitrous users please read! Simi Stang Windsor Power 12 12-19-2002 02:51 PM
Nitrous times, finally. chris91LX Windsor Power 4 11-11-2002 07:58 PM
Comments on this Nitrous System 93boss Windsor Power 3 03-20-2002 05:19 PM
WOO HOO! RAN NITROUS AT TRACK! (long, real long) bark3rd Modular Madness 26 08-20-2001 08:05 AM
I need a crash course in NITROUS ED Dark_5.0 Windsor Power 7 07-12-2001 06:03 PM


All times are GMT -5. The time now is 10:50 PM.


SEARCH