turbo
 

i was look at some turbo kits for 89 mustang and i was woundering who has turbo on there car . how big of gains do you get with turbo on these car . i had a buick ttype and i like turbo . i just woundering how hard it is to put on and how yous like it


thanks jason

What you need to do is get a big turbo. and go to a mufffler shop and ask them to make the pipes and you will have one bad *** turbo kit for cheap. this is the way to go Tial 46mm High Pressure (1.1 bar - 1.6 bar): $505.00 . then a GT35R Roller Bearing Turbo (700hp)
T04S Compressor (56 Trim) .70 A/R
T3 Turbine Housing (84 Trim) .63, .82, 1.06 A/R
60 lbs/min that is a great turbo you can get it for like 1590$ and that will take care of that. get a Tial 50mm Blow Off Valve: $205.00 I have the hook up here in utah you can get the pipes for 350$. Order from this guy name Jeffrey his web site is www.extremeboost.com He is good and fast. plus he has a 2nd gen Mr2 with 615 hp so that makes him good in my book.

if you have any qustions My e-mail is mustang_801@yahoo.com
Brad

i still have the turbo from my buick t type (ta-62)would that work . would i have to get them to make me a down pipe ill give thim a call


thanks jason

Re: turbo
 

Turbo Technology Street kit here. Never had it on the dyno, never had it to the track, just a few friendly races with some guys I know. Other than the turbo kit, I have Edelbrock heads. From 40-120, I beat a a friend's car that went 12.20's by 3 car lengths. My car is a full weight AOD convertible with no weight reduction at all. This was also on pump gas with 8 lbs of boost, a little race gas and 12-15 lbs and it might have been really bad. As far as installation of the kit, overall it was pretty easy. Could probably be put on in a couple of days if you were really motivated.

Check out www.turbomustangs.com for links to about everything you would every want to know.