© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
05-09-2001, 01:40 PM | #1 |
Guest
Posts: n/a
|
Going to track after latest mods!
Well, it's been a while since I've been at the track (closest is 1 1/2 hrs away), so since I've recently completed new mods, I'd like to see where I'm at. I'm hoping I can update my sig by Monday. Any guesses what I'll turn?
------------------ '90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; fiberglass turbo hood; A/C-less; rear seat-less; cat-less; 2 chamber Flos; Corbeau racing seats (fronts); 30# injectors; 190 lb fp; FPR; TFS track heat Intake - 12.513 @ 112 mph (Pre-inj/fuelpump/FPR/intake) |
05-09-2001, 04:35 PM | #2 |
Registered Member
Join Date: Feb 1999
Location: Utica, Michigan
Posts: 2,631
|
What kind of intake and injectors did you have before? If I was trapping 112 I probably would not mess with anything!
My car is pretty stripped down, (2760 without me) and I ran 12.8 @ 111 on motor. That is with ported heads and intake too. Actually, I don't think i've ever even seen an all motor injected 302 run over 112!!! ------------------ 1988 Mustang GT 12.0 @ 122 1992 BadAzz Wrangler 1993 Explorer |
05-09-2001, 04:54 PM | #3 |
Guest
Posts: n/a
|
I was running my original stock intake and injectors at the time of the 12.5. The car, honestly, was running a 13.8 w/ minor mods (underdrive pulleys/3.55/K&N filter/f-g hood/lightweights seats/no spare)....it came very fast from the factory. I guess it was a "freak". My car's running light too. The track weight is about 3050 (w/ me in it). As for the trap speed, I was on slicks, so no wheel spin whatsoever.
------------------ '90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; fiberglass turbo hood; A/C-less; rear seat-less; cat-less; 2 chamber Flos; Corbeau racing seats (fronts); 30# injectors; 190 lb fp; FPR; TFS track heat Intake - 12.513 @ 112 mph (Pre-inj/fuelpump/FPR/intake) |
05-09-2001, 10:50 PM | #4 |
Registered Member
Join Date: Dec 2000
Location: Katy Texas
Posts: 70
|
id say if you run everything the exact same as you did when you ran the 12.5 but with the added mods then ud run a 12.2 or 12.3 but i could be wrong. not likely though
------------------ 1995 gt convertible: 3.55 gears, underdrive pulleys, cobra intake , fenderwell cold air, 65mm throttle body, 75mm mass air meter, off-road h pipe, borla cat back, custom diablo chip, 155lph fuel pump lentech aode street terminator w/ 10" converter stalls at 2800 rpms, yokohama a520(drag radials) 275s |
05-16-2001, 01:48 PM | #5 |
Guest
Posts: n/a
|
Results are in....not too bad, but not as good as I hoped for. It was a little hot for my liking (about 80-85 degrees), but no excuses. I made 3 passes, not as consistent as I'd hoped for either. 12.472 @ 115.....12.299 @ 113....12.568 @ 112. I was hoping (unrealistically) to get the perfect run and hit 12.0 something. Oh, well - at least I didn't spend my latest cash in vain and I can still update my SIG. Now....planning next phase!
------------------ '90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; fiberglass turbo hood; A/C-less; rear seat-less; cat-less; 2 chamber Flos; Corbeau racing seats (fronts); 30# injectors; 190 lb fp; FPR; TFS track heat Intake - 12.513 @ 112 mph (Pre-inj/fuelpump/FPR/intake) |
05-17-2001, 02:49 AM | #6 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
DAMN We have almost the same motor combo but your trapping 115mph!! Holy **** that is good. My car is trapping 107mph with a short belt.
Got any tips? Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows. 12.55@107mph Mustang owners get a 15% discount! www.OJAIPCPROS.com |
05-17-2001, 08:33 AM | #7 |
Guest
Posts: n/a
|
I agree 115MPH is awesome dude!!! Are your heads or intake ported. Crap i'm only running a 108mph (without pulleys, ramair, FPR and using 19lb injectors or ported intake). Hopefully i can pull those kind of #'s with the above changes that i made over the winter.
Your car is light though 3050 w/.driver wow. congrates. ------------------ 306ci, TFS stage 3 heads. port/pol edlebrock performer intake. 77mm mass air, 70mm TB, crane 2030 cam, Mac full length headers, flowmasters 3.73 gears and more. |
05-17-2001, 01:46 PM | #8 |
Guest
Posts: n/a
|
My car is very light....3080 before removing a/c (and all it's hardware), front and rear seats, fiberglass, spare etc etc. It's all in the launch (not to sound overly simplistic)and then just don't over/under rev the car and bang those gears. I know my car inside and out, and I know exactly when I'm maxing out of each gear. And, w/ that 115, I launched at 3500, instead of my normal 2000-2500 and couldn't get out of the box as well as I should have. Seemed a bit high to me too....but I'm not arguing w/ it.
------------------ '90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; fiberglass turbo hood; A/C-less; rear seat-less; cat-less; 2 chamber Flos; Corbeau racing seats (fronts); 30# injectors; 190 lb fp; TFS track heat Intake (12.299 @ 113) |
05-17-2001, 02:55 PM | #9 |
Guest
Posts: n/a
|
WOW
------------------ Black, 84 GT, ground effects, shorty headers, dual exh., rear spoiler from a 87, just getting started... |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Track conditions | Eric4Nitrous | Windsor Power | 12 | 11-22-2002 10:59 PM |
Tell me what you think...track numbers | silver_pilate | Blue Oval Lounge | 5 | 10-30-2001 03:44 PM |
Track Times Down After Mods | PeTr0 | Windsor Power | 11 | 07-28-2001 03:55 PM |
Mustang Club of Central Iowa Autocross - May 6 - Marshalltown Go-Kart Track | KB1991 | Ford Show & Go | 0 | 05-03-2001 12:33 PM |
Mustang Club of Central Iowa Autocross - May 6 - Marshalltown Go-Kart Track | KB1991 | Corner Carvers Delight | 0 | 05-03-2001 12:32 PM |