

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Feb 2002
Location: Spokane
Posts: 8
|
![]() I wanna get 4 lug chromed cobra r wheels for my stang with 17 in tires, but i dont know what a safe size would be...is it pretty much standard? I dont want any rubbing when i turn. Also, what exactly is a low profile tire/ This is my first tire buying experience.
black/black 92 mustang gt 5.0 vert Last edited by stangirl92; 02-25-2002 at 11:18 PM.. |
![]() |
![]() |
![]() |
#2 |
Rebel Fleet Commander
Join Date: Oct 2001
Location: Huber Heights, OH
Posts: 1,003
|
![]() I have 17 Speedware 4lugs on my 93GT. They have 275-40-17 on the rear and 245-40-17 on the front. Had to remove the quad shocks and dent in my 3 inch cat-back. The fronts rub just a little when you turn the wheel all the way. Hope this helps
__________________
1993 Mustang GT, PTK w/ T-64 - My Cardomain Webpage 11.25@123.5 on only 8 psi. 10.84@121 on only 1 headgasket ![]() ![]() ![]() "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!" ![]() |
![]() |
![]() |
![]() |
#3 |
Tubbed and Juiced
Join Date: Mar 2001
Location: Tulsa, Oklahoma
Posts: 1,861
|
![]() Ok what year is your stang? And Speedware is BBK. Good brand. I had the 17x9's all the way around with 245's. 9 inch rims are simply too big up front. Get 17x8 up front with either 235's or 245's. And either get 17x9 in the back, as big as I'd go is 245's, no mod's needed. Or for rotating abililty go with 17x8's all the way around with 245's, there shouldn't be any rubbing, and they will look great. Oh by the way, when I had the 17x9 inch rims on the front they rubbed hardcore.
|
![]() |
![]() |
![]() |
#4 |
Tubbed and Juiced
Join Date: Mar 2001
Location: Tulsa, Oklahoma
Posts: 1,861
|
![]() Don't remove you quad shocks to fit big tires, it'll hurt you in the traction department severly, and do more harm than good. Unless you spend $300-500(not sure the price, somewhere around there.) to get the quad-shock replacement brace, which it's not really worth it then.
|
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Aug 2001
Location: Anaheim, Ca.
Posts: 31
|
![]() I run 235/45/17 in the front and 255/45/17 in the back. I used to have 255/40/17's all the way around, and the front didn't rub, but when i got my new front tires that were 235/45's they rubbed, even thought they were different sizes. Weird. I would like to have 275's in the back but many people tell me it won't fit especially due to the fact that I have 1.5 in. lowering springs. In fact Justin helped me to not waste my money on 275's, thanks Justin.
![]() Later, Will
__________________
3.55 Gears,Posi,MAC 1 5/8 Shorties,MAC Off-Road H-Pipe,Flowmaster 3 Chamber Mufflers,BBK 65mm Throttle Body,FRPP Aluminum Driveshaft,FRPP B-303 cam,Pro 5.0 Shifter,1 1/2in. Lowering Springs,HPM Subframe Connectors,HPM Driveshaft Loop,Full Saleen Body Kit and Wing,2.5in. Double Cowl Hood,17" Saleen Speedline Wheels. So Cal Wild Horses |
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Jan 1999
Location: Clayton, North Carolina, USA
Posts: 803
|
![]() I have 17" x 8" wheels with 245/45/17 tires all around. These fit well with a slight rub on the front when you turn the wheel all the way, the tire hits the "A" arm slightly.
I have removed the quad shocks and installed Hotchkis upper and lower control arms, but I don't think there would be a problem even with the quads with my arrangement. A low profile tire is basically a tire with a shorter side wall. When you change from a 15" wheel up to a 17" wheel, your tire will have about the same outside diameter and since you have changed your wheel diameter by 2", the side wall will be 1" shorter. You can compare tire profiles by looking at the size designation. For example, 245/45/17, 245 is the tire width in mm, 245/25.4 = 9.645 inches wide, 45 is the side wall which is 45% of the tire width, 9.645 x .45 = 4.34" and 17 is the wheel diameter. So, to determine the tire diameter just add up the side wall and the wheel dia, (4.34 x 2) + 17 = 25.68" diameter. Somebody check my math ![]() You should try to keep the wheel diameter close to the stock diameter to keep your speedometer accurate and more importantly so that the car looks cool. Unless you are in to the alternate look I see around with the small diameter wheels with a huge offset and tires that are way undersized for the wheel, you know the look, guess I'm old school but never could understand that hole thing... Tires and wheels can really make the look of your car, so do your home work and make a good decision. Good luck! |
![]() |
![]() |
![]() |
#7 |
STANGPOWER.COM
Join Date: Jun 1999
Location: Ontario, Canada
Posts: 1,045
|
![]() I run 17*9 all around.
235/45/17 for the front - no rubbing 275/40/17 for the rear - had to flip the quads, do not remove them. I bought mine for $699. ![]() ![]() ![]()
__________________
My WebSites: VortechPower.com - Brand new site for Vortech users! NOVIPOWER.COM - Devoted to the performance of the NOVI supercharger STANGPOWER.COM - A small community based in Canada for Mustangs MORE WebSites Coming soon PLEASE NOTE: I am not an affiliate (nor do I work for) any Mustang parts retailers - I create informational Mustang WebSites |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
tire sizes? | chiaronate | Windsor Power | 4 | 04-16-2004 05:59 PM |
16" Wheels 0n 67-68 - Tire Sizes? | Baxter | Classic Mustangs | 3 | 12-23-2003 12:20 PM |
any truth to this idea about flat tires?? | jetuomi | Blue Oval Lounge | 17 | 04-16-2002 12:35 AM |
Max Wheel / Tire Sizes on '95 | RodsByRad | Windsor Power | 0 | 12-10-2001 05:33 PM |
Please Help - Spare Tire Sizes | JerseySandy | Windsor Power | 0 | 05-13-2001 06:55 PM |