GT40 P heads plugs

Shotgun28 · 04-02-2001, 08:19 PM

Now is it 93 Cobra plugs or 98-99 Explorer Plugs or both? Just want the best. Thanks.

------------------
91 LX Convertible Gray on Red B&M Shift improver kit,ASP red alum. underdrive pulleys, Richmond 3.73 gears, 1 5/8 Flowtech long tube Headers and off road h-pipe, Flowmaster 2-chamber cat-back with S.S exhaust, MSD 6A Ignition with coil,Cap and rotor, Taylor Pro wires, K&N 12" conical filter system, Jet stage 2 performance chip,GT40 P heads, looking at new exhaust, Lentech Street Terminator plus.

Nicks5.0 · 04-03-2001, 03:08 AM

i got 98 explorer plugs and they work fine. just dont get the crapinu---i mean platinums. im just running champions, see a lot of people running autolites as well. hope this helps, nick

------------------
1990lx coupe, balanced 302, gt40p heads, wolv 1087 cam, 1.7rr's, 65mm tb, 75mm maf, comp box on top of cobra lower, anderson ford pms, full exhaust, drag type susp. and tubular front end, 3.55's. traps 105mph before some mods, look for 110mph very soon

Jeff Chambers · 04-03-2001, 06:31 AM

I run Autolite 103's (104 is stock). I also like the Motorcraft AWSF22C (AWSF32C is stock). I don't care for Champions...they're fine for lawnmowers but I don't like them in my race motor. You see very few serious racers running Champions. I've had some big name tuners warn me away from them. I've got a cross reference chart for GT-40P plugs on my website under the 'Tech Tips' section.

------------------
Jeff Chambers
Trophy Stock #3
11.86 Seconds / 113.8 MPH
Chambers Racing Team

04-02-2001, 08:19 PM	#1
Shotgun28 Registered Member Join Date: Sep 2000 Location: New Hope MN USA Posts: 276	GT40 P heads plugs Now is it 93 Cobra plugs or 98-99 Explorer Plugs or both? Just want the best. Thanks. ------------------ 91 LX Convertible Gray on Red B&M Shift improver kit,ASP red alum. underdrive pulleys, Richmond 3.73 gears, 1 5/8 Flowtech long tube Headers and off road h-pipe, Flowmaster 2-chamber cat-back with S.S exhaust, MSD 6A Ignition with coil,Cap and rotor, Taylor Pro wires, K&N 12" conical filter system, Jet stage 2 performance chip,GT40 P heads, looking at new exhaust, Lentech Street Terminator plus.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help I need heads!!	SmokinStangGT	Windsor Power	18	05-04-2003 10:05 PM
Fouled plugs after 5 months of storage and a light ride home	Stang_ROTY	Windsor Power	1	04-20-2003 04:53 PM
seized plugs in aluminum heads.... What to do?	82 GT	Windsor Power	7	04-30-2001 09:21 AM
is there any difference between 351C heads and 351M heads	tireburner163	Windsor Power	7	03-09-2001 09:26 PM
Is the true about Edelbrock heads with TFS intake?	gt93mustang	Windsor Power	14	03-06-2001 07:01 PM

04-03-2001, 03:08 AM	#2
Nicks5.0 Registered Member Join Date: Jun 2000 Location: Belleville Il, USA Posts: 234	i got 98 explorer plugs and they work fine. just dont get the crapinu---i mean platinums. im just running champions, see a lot of people running autolites as well. hope this helps, nick ------------------ 1990lx coupe, balanced 302, gt40p heads, wolv 1087 cam, 1.7rr's, 65mm tb, 75mm maf, comp box on top of cobra lower, anderson ford pms, full exhaust, drag type susp. and tubular front end, 3.55's. traps 105mph before some mods, look for 110mph very soon

04-03-2001, 06:31 AM	#3
Jeff Chambers Moderator Join Date: Aug 2000 Location: Milan, OH Posts: 2,699	I run Autolite 103's (104 is stock). I also like the Motorcraft AWSF22C (AWSF32C is stock). I don't care for Champions...they're fine for lawnmowers but I don't like them in my race motor. You see very few serious racers running Champions. I've had some big name tuners warn me away from them. I've got a cross reference chart for GT-40P plugs on my website under the 'Tech Tips' section. ------------------ Jeff Chambers Trophy Stock #3 11.86 Seconds / 113.8 MPH Chambers Racing Team