MustangWorks.com : Ford Forums - View Single Post - 24lbs injectors and crower 15511 on speed density

Yan88gt · 03-18-2002, 10:28 AM

I'm gonna put a set of aluminium heads and a good intake. I know that my cam and my injectors are not suitable for my heads and intake, but i know that the injectors and the cam are critical parts to make 350hp(that's my goal), even more on speed density. By swaping those parts, i was able to see if my project of a 350hp speed density would work or not. A guy on another forum who seem to be a guru of speed density told me that the speed density cars like to be over 1 volt. My idle is set at 900 rpm. At 700 rpm, the car was surging.

03-18-2002, 10:28 AM	#4
Yan88gt Registered Member Join Date: Jun 2001 Location: Quebec canada Posts: 92	I'm gonna put a set of aluminium heads and a good intake. I know that my cam and my injectors are not suitable for my heads and intake, but i know that the injectors and the cam are critical parts to make 350hp(that's my goal), even more on speed density. By swaping those parts, i was able to see if my project of a 350hp speed density would work or not. A guy on another forum who seem to be a guru of speed density told me that the speed density cars like to be over 1 volt. My idle is set at 900 rpm. At 700 rpm, the car was surging. __________________ Ported stock heads and intake, 65mm throttle body, 1.7 roller rockers, pulley, superchip,afpr, electric fan, motorsport headers, magnaflow cat-back, hurst shifter, 3.55 gear, speed density computer 12.81@ 104.7 on E.T street (1.77)