MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   302 HO vs. 302 (http://forums.mustangworks.com/showthread.php?t=51103)

gsmotorsports 05-16-2010 06:47 PM

302 HO vs. 302
 
What are all the differences between a 302 HO motor and a normal 302? are the blocks any different? i know the HO uses the 351W firing order but other than that why were they any better than a normal 302?

goodyear1984 05-17-2010 05:52 PM

Re: 302 HO vs. 302
 
the 87-93 ho motors have forged pistons,im pretty sure the 86 ho has forged pistons but theres no fly cut so u cant fun a good size cam.the regular 302 say in a crown vic has cast pistons and usally the e6 lower compression heads.the cam in a ho has the better firing order 13726548 where the reg 302 has the shitty firing order. the blocks are the same. the crank is the same and the rods are the same.
ps 87-93 ho motors are a dime a dozen

gsmotorsports 05-19-2010 01:08 AM

Re: 302 HO vs. 302
 
So its relatively easy to go from 302 to a 302 ho then? and are they at all that much better?

goodyear1984 05-26-2010 10:42 PM

Re: 302 HO vs. 302
 
better as far as the ho has forged pistons that take more abuse,the cam has the better firing order its not a great cam but its better the the regular 302

gsmotorsports 06-10-2010 10:44 PM

Re: 302 HO vs. 302
 
is there anyway to make a 302 HO into a 347 Stroker? or is it pointless since your taking out the HO cam and putting in a new one anyways and along with taking out the forged pistons for new ones?

Unit 5302 06-26-2010 12:21 PM

Re: 302 HO vs. 302
 
Well, the 302HO or 5.0HO's go back to 1982. If you're talking about EFI versions of the engines, there are some differences.

#1 Firing order
#2 87-92 5.0HO's had forged pistons. '93s got the hypers.
#3 Camshafts
#4 '86 5.0HO and the 87+ non 5.0HO got E6SE heads (suck)

Yes, you can make a 302 into a 347. You'll just need a conversion kit (not a simple swap) and unless you're planning on adding heads/cam/intake, it's absolutely a waste of money. The stock parts will restrict your power production.

goodyear1984 07-03-2010 09:31 PM

Re: 302 HO vs. 302
 
e7 heads suck too.the e6 have a better combustion chamber design but there low compression head

cowkiller87gt 07-03-2010 09:47 PM

Re: 302 HO vs. 302
 
H.O all the way stock for stock. Your best bet is to get a XXX bare block and build your own engine. Building your own engine will get you familiar with it. And buying the parts require's research so you will know how much you can push it.


All times are GMT -5. The time now is 05:56 PM.