Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
05-16-2010, 06:47 PM
|
#1 |
|
Registered Member
Join Date: Apr 2010
Posts: 11
|
302 HO vs. 302
What are all the differences between a 302 HO motor and a normal 302? are the blocks any different? i know the HO uses the 351W firing order but other than that why were they any better than a normal 302?
|
|
|
|
05-17-2010, 05:52 PM
|
#2 |
|
Registered Member
Join Date: Dec 2006
Location: new york
Posts: 482
|
Re: 302 HO vs. 302
the 87-93 ho motors have forged pistons,im pretty sure the 86 ho has forged pistons but theres no fly cut so u cant fun a good size cam.the regular 302 say in a crown vic has cast pistons and usally the e6 lower compression heads.the cam in a ho has the better firing order 13726548 where the reg 302 has the shitty firing order. the blocks are the same. the crank is the same and the rods are the same.
ps 87-93 ho motors are a dime a dozen
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's  1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo |
|
|
|
|
05-19-2010, 01:08 AM
|
#3 |
|
Registered Member
Join Date: Apr 2010
Posts: 11
|
Re: 302 HO vs. 302
So its relatively easy to go from 302 to a 302 ho then? and are they at all that much better?
|
|
|
|
|
05-26-2010, 10:42 PM
|
#4 |
|
Registered Member
Join Date: Dec 2006
Location: new york
Posts: 482
|
Re: 302 HO vs. 302
better as far as the ho has forged pistons that take more abuse,the cam has the better firing order its not a great cam but its better the the regular 302
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo |
|
|
|
|
06-10-2010, 10:44 PM
|
#5 |
|
Registered Member
Join Date: Apr 2010
Posts: 11
|
Re: 302 HO vs. 302
is there anyway to make a 302 HO into a 347 Stroker? or is it pointless since your taking out the HO cam and putting in a new one anyways and along with taking out the forged pistons for new ones?
|
|
|
|
|
06-26-2010, 12:21 PM
|
#6 |
|
Registered Member
Join Date: May 1999
Posts: 5,246
|
Re: 302 HO vs. 302
Well, the 302HO or 5.0HO's go back to 1982. If you're talking about EFI versions of the engines, there are some differences.
#1 Firing order #2 87-92 5.0HO's had forged pistons. '93s got the hypers. #3 Camshafts #4 '86 5.0HO and the 87+ non 5.0HO got E6SE heads (suck) Yes, you can make a 302 into a 347. You'll just need a conversion kit (not a simple swap) and unless you're planning on adding heads/cam/intake, it's absolutely a waste of money. The stock parts will restrict your power production. |
|
|
|
|
07-03-2010, 09:31 PM
|
#7 |
|
Registered Member
Join Date: Dec 2006
Location: new york
Posts: 482
|
Re: 302 HO vs. 302
e7 heads suck too.the e6 have a better combustion chamber design but there low compression head
__________________
347 stroker all forged,arp everything,stud mains w/girdle,7qt pan,full roller, custom cam, aluminum heads swirl valves 5 angle valve job.quick fuel 750,areomotive pump,cobras w/nitto drags,and m/t et drags for the track, ford racing 373 gears,centerforce clutch,tko500,underdrive pulleys,bassani x-pipe,flowmasters ^best et so far 11.6 1.61 60ft coming soon 9sec et's 1992 mustang gt 2001 gmc 1500 4x4 78 century boat 92 skidoo |
|
|
|
|
07-03-2010, 09:47 PM
|
#8 |
|
Registered Member
Join Date: Jul 2010
Posts: 3
|
Re: 302 HO vs. 302
H.O all the way stock for stock. Your best bet is to get a XXX bare block and build your own engine. Building your own engine will get you familiar with it. And buying the parts require's research so you will know how much you can push it.
|
|
|
|
 |
|
|