![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
He said Member...heh, heh
Join Date: Sep 1999
Location: Jupiter, Florida U.S.A.
Posts: 3,718
|
![]() My best friends neighbor just recently bought an '89 GT with a new 351 Windsor with about 600 miles on the engine.... After about a week of normal driving, today he got in it and started to drive away when it died... After the usual looking-at-every-part-in-the-engine-before-this-one technique, we saw that the distributor rotor was not spinning while trying to start the car. We pulled the distributor out and saw that the gear was missing chunks of teeth and was completely sheared bare of teeth on one side. The camshaft gear looked ok from what we could see of it.
What do you think would have caused this? Any suggestions for the fix? ------------------ Joe! 1988 GT, 167,000 miles!!! 13.71@105mph Check out my listing! Click here! Or my website: www.joe4speed.com 1999 Ninja ZX-6R 10.32@135mph! "What was the best thing before sliced bread?" |
![]() |
![]() |
![]() |
#2 |
gear banger
Join Date: Aug 2000
Location: CHICAGO
Posts: 1,144
|
![]() Yep, happend to me before. If there is a roller cam in there he will need a steel, or bronze distributer gear. Flat tappet cams use a cast iron gear. I am now using a steel gear and the problem is solved.
------------------ Blown 347 W/Canfield heads, solid roller cam, track times this spring mid 10's or bust 93lx 5.0 daily driver |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Oct 1998
Location: Rogers, MN
Posts: 2,089
|
![]() He should use a steel gear. The gear on the distributor should be as hard as the gear on the camshaft.
------------------ 351W 89 Mustang GT Convertible |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Jan 1999
Location: Dale City Va.
Posts: 516
|
![]() Don't use anything but a steel gear with a roller cam on Winsor motors! Bronze will break as well. Been there done that. Steel only!
|
![]() |
![]() |
![]() |
#5 |
He said Member...heh, heh
Join Date: Sep 1999
Location: Jupiter, Florida U.S.A.
Posts: 3,718
|
![]() Thanks for the replies! That was the original distributor. Would that have come with bronze or iron gears?
Joe |
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Oct 1998
Location: Rogers, MN
Posts: 2,089
|
![]() When I bought my distributor it came with an iron gear.
------------------ 351W 89 Mustang GT Convertible |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
ground wire | spydar336 | Audio, Security, & Electronics | 3 | 12-24-2003 10:18 PM |
89 GT Ground Effects Paint & Stripes | ChunkFunky | Windsor Power | 0 | 05-22-2002 05:46 AM |
full leanght header ground clearance | bosco | Windsor Power | 3 | 01-28-2002 03:03 PM |
aftermarket ground effects? | XPrinceChipX | Appearance & Detailing | 3 | 11-29-2001 11:53 PM |
ground effects | win895.0 | Appearance & Detailing | 0 | 06-23-2000 12:01 AM |