© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
11-24-2003, 05:49 PM | #1 |
Registered Member
Join Date: Apr 2002
Location: Canada
Posts: 56
|
EFI 351W How fast should it go?
Just finished up putting a 351W into my mint 89 hatchback
I was just wondering if anyone could give me a guess on power output and how fast it might go? I'm in Canada and things are shut down up here for the winter 351W, AFR 185cc, 10:1comp, roller Crane Cam w/220/228@.050 .542/.563 lift, TFS 351W Intake, Crane roller rockers, 30# injectors, 75mm TB and Mass Air, BBK 1 3/4" long tubes, T-5, 3.55s, McCreary G-60s, subframe connectors. It doesn't seem to pull top end like it should, the AFRs still have the stock springs that are rated at .550" lift, but i measured and there is no coil bind, whats up? On the G-Tech Pro it said i only ran a 12.95 @114mph, i think it should be faster than that. |
11-24-2003, 06:09 PM | #2 |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
With the engine in your signature I would be pissed if I didnt get deep in the 11's.
High-mid 11's should be easy money IMO,
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
11-24-2003, 10:24 PM | #3 |
Registered Member
Join Date: May 2000
Location: Ontario,Canada
Posts: 233
|
Are you getting enough fuel to the motor?? Fuel injector size or pressure may be part of the problem.
Sucks that the tracks are closed down, now I gotta wait to test out my Stang next spring. DAMN WINTER!!!!
__________________
1989 Mustang LX Notch 5.0L, T-5, 1969 351W heads, cut & welded stock plenum, F-303 cam, Mac 1 5/8 full length headers, Cat'd H-pipe, 3.73 gears, Underdrives, SSM lift bars, E-Fan, 3G Alt, Custom Chip, Autometer gauges, Weld Draglite wheels , M/T ET Street Radials Best 1/4: 13.33@101.53MPH |
11-24-2003, 11:02 PM | #4 |
Registered Member
Join Date: Apr 2002
Location: Canada
Posts: 56
|
Injectors are 30#, 190lph intank pump, fuel pressure is a guess at best. I have it set at around 38psi and timing at 15*. The car pulls like a rocket out of the hole, I was wondering if i should swap gears to 3.73 or 4.10s. Any suggestions coments on the car in gerneral?
|
11-25-2003, 08:20 AM | #5 |
Registered Member
Join Date: May 2000
Location: Kamloops, BC
Posts: 2,875
|
Where are you in Canada?
|
11-25-2003, 09:35 AM | #6 |
Registered Member
Join Date: Nov 2003
Location: Rockford
Posts: 596
|
Hello, sounds like you have a cool combo. I believe you should be at least a 12.0 car maybe as fast as a mid 11 sec. at sea level but, weather, traction, driving habits etc, play a huge role. Not to say that you not a good driver, but just keep practicing your driving, all of us could do better with practice, even John Force. But what do I know? As goes for your gearing, I would put in 4.10 gears, and hope for at least a 1.6 to a low 1.7 60-foot. Before I forget I would replace those valve springs to support like.600 lift. Just because you don't see coil bind doesn't mean there are the right springs. Need to check your seat pressure and open pressure to make sure they are good enough for that cam. You could be floating the valves on the top end and not really know it! I would check the springs before you hurt something that really costs a lot more then just replacing valve springs.
Good luck |
11-25-2003, 01:24 PM | #7 |
Registered Member
Join Date: Apr 2002
Location: Canada
Posts: 56
|
FOR: 95mustanggt
I live over in Brandon Manitoba, where there are a grand total of about 10 5.0s, a few RA TAs and the cops hate everyone! I own K&E Engine Works, My partner and I build some serious engines (by the way he drives a Camaro, what are pare we are haha) |
11-25-2003, 02:19 PM | #8 |
I got something to say
Join Date: Sep 2001
Location: San Diego, CA
Posts: 1,557
|
get it dyno tuned
__________________
91 LX Hatch 5.0 - made for the twisties 89 LX Hatchback 5.0 5spd. stolen/stripped 4/7/05 http://www.mustangworks.com/cgi-bin/...splay.cgi?3494 1987 Toyota Pickup Ricer Haters Club Member #33 Want a custom gauge cluster for your Vintage Mustang? www.jmeenterprises.com |
11-25-2003, 02:23 PM | #9 |
Registered Member
Join Date: Apr 2002
Location: Canada
Posts: 56
|
Up here in Canada, i'll have to travell 12hrs to the nearest chassis dyno to get it done. Brandon is right smack dab in the middle of The Great White North. I was thinking of bringing a dyno into my shop though, those things pay for themselves!
|
11-25-2003, 03:28 PM | #10 | |
Registered Member
Join Date: May 2000
Location: Kamloops, BC
Posts: 2,875
|
Quote:
There is a fair amount of land above the arctic circle. Quite more than people think. It just all looks the same! LOL |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
351w or 347 stroker? which is better? | BLACK85GT | Windsor Power | 55 | 12-21-2002 06:52 PM |
351W heads on 289 stock engine | sleeperstang | Classic Mustangs | 5 | 11-21-2002 08:35 PM |
FAST vs. Chip | STEEDAJEFF | Windsor Power | 1 | 09-29-2002 02:16 PM |
351W in a Fox body | greydan | Windsor Power | 4 | 07-03-2002 02:33 PM |
Are these fast?? | Dark_5.0 | Stang Stories | 13 | 05-16-2002 01:19 PM |