MustangWorks.com : Ford Forums - View Single Post

madokie · 11-10-2002, 01:15 AM

83-92 ranger/bronko2 4cyl or 3.0 v6 is 7.5 rear end .driver side only! 4.0 rangers use 8.8 rear end axles same unless you are using drum brakes.4.0 ranger 8.8 rear uses 10 inch drum stang 8.8 uses 9 inch drum.for disk brakes ethier axle works fine.length is 29.156 inches .use tape measure from flange to end of axle and you will get 29.25.86-97 aerostar pass side also.from 1979 to 1993 FORD made one axle for stang 4-lug fits 7.5 or 8.8 same axle same strength.i make up 5-lug rear disk kits using mk-7 parts and ranger axles,all mods and welding done uses your stock p-cables,and brake lines with 2-3 port kit 300$ .250$ with out axles okc okla 405-943-8476

11-10-2002, 01:15 AM	#3
madokie Registered Member Join Date: May 2002 Location: okc okla Posts: 5	5-lug axle 83-92 ranger/bronko2 4cyl or 3.0 v6 is 7.5 rear end .driver side only! 4.0 rangers use 8.8 rear end axles same unless you are using drum brakes.4.0 ranger 8.8 rear uses 10 inch drum stang 8.8 uses 9 inch drum.for disk brakes ethier axle works fine.length is 29.156 inches .use tape measure from flange to end of axle and you will get 29.25.86-97 aerostar pass side also.from 1979 to 1993 FORD made one axle for stang 4-lug fits 7.5 or 8.8 same axle same strength.i make up 5-lug rear disk kits using mk-7 parts and ranger axles,all mods and welding done uses your stock p-cables,and brake lines with 2-3 port kit 300$ .250$ with out axles okc okla 405-943-8476 __________________ FORD beating jap crap since1941