02-11-2002, 11:44 AM
| #1 (permalink) |
| The Pickup Man  Join Date: Mar 2001 Location: Turn off the Paved Road
Posts: 1,636
|  4 cyl. spindles vs. V8 spindles Are the spindles the same on a V8 car and a 4 banger. I want to run the bigger brakes I dont w3ant to change spindles if I dont have to. I have the v8 stuff on another car but I dont want to have to compress the spring and take the struts off if I dont have to. Also if the spindles are the same and all I have to do is change rotors, I can use the 5 lug Lincoln rotors on the front with the Lincoln Calipers and have 11" 5 lug brakes in teh front correct??? Thanks Brad
__________________ My Truck 1986 Coupe, 429, c6, some other stuff if I ever get rich. Built Ford Tough Moderator |
|      |
|
02-11-2002, 06:10 PM
| #2 (permalink) |
| Sober voice of Reason  Join Date: Nov 1998 Location: Kelowna, B.C., Canada
Posts: 1,508
| The 4 cyl spindles won't mount the brake calipers for an 11" rotor, you'll need to switch them. Once you swap the spindles then you can use Mark VII rotors for 5 lug.
__________________ F4TE 351w block 393 stroker: Scat 3.85" crank, scat H beams, Probe SRS pistons, Proformed 750 DP holley, Vic jr intake, AFR 205's, Buddy Rawls hydraulic roller cam, Crane 1.6 Gold race rockers, Powerforce SFI balancer, centerforce steel flywheel. Kooks 1 3/4" headers, Spec stage III clutch, Dr. Gas 3" x-pipe, spintech pro streets, TKO-600, Moser 31 splines, Detroit Locker. Just about back on the road... |
|
| |
|
02-11-2002, 07:12 PM
| #3 (permalink) |
| The Pickup Man Join Date: Mar 2001 Location: Turn off the Paved Road
Posts: 1,636
|  Thanks Man Thanks, I found some information and Kevin helped me out to. Now all I have to do is go buy some parts. Hehehe Brad
__________________ My Truck 1986 Coupe, 429, c6, some other stuff if I ever get rich. Built Ford Tough Moderator |
|
| |
| Sponsored Links | |
| | |
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| IFS drop spindles on 65-66? | 65modified | Classic Mustangs | 15 | 01-29-2007 06:06 AM |
| Spindles for Brake Conversion | Vishnoff | Classic Mustangs | 2 | 08-06-2002 05:12 PM |
| Will 70 granada spindles work on my car | David Fulford | Classic Mustangs | 2 | 08-12-2001 12:37 AM |
| SN95 spindles on an '84? | 84_GT350 | Windsor Power | 1 | 06-06-2001 04:21 AM |
| 94/95 or 96+ spindles? Darius? | Skankin | Corner Carvers Delight | 5 | 05-03-2001 01:51 PM |
Linear Mode
