This how I did it: I removed the stock belts and used the same bolts to attach the lap portion of the belt. I drilled a hole behind the seat and installed an extra plate on the bottom side of the floor pan and used a nut and bolt to attach the shoulder belts. The submarine belt(the one between your legs) I did basically the same thing I did for the shoulder belts. If you plan on going to the drag strip, remember the belts are only good for 2 year from the date sewn on the belt. If you go ahead and spend the money and get Simpson belts, you can send them in for $40.00 and have them recertified every 2 years. Otherwise after the 2 years, you'll be buying them again. But if you're not going to make the trips to the dragstrips after the 2 years are up then keep them in there.
|